C2MT-07224BBC03FE0

Specification: Part Number 1207838 Safe state in the event of a fault: At least one OSSD is in the OFF state. Cable length: 700 mm TM (mission time): 20 a (EN ISO 13849) Cascaded: - Air humidity: 15 % ... 95 %, non-condensing Category: Category 2 (EN ISO 13849) PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Conductor cross-section: 0.34 mm² Restart interlock: + Shock resistance: 10 g, 16 ms (EN 60068-2-27) Ripple: ≤ 10 % Power consumption: ≤ 3 A Scanning range: 0 m ... 6 m External device monitoring (EDM): + Automatic beam coding: + Resolution: 24 mm Test rate (internal test): 58 /s Storage temperature: -25 °C ... +70 °C Protection class: III (EN 61140) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Switching voltage LOW: 2 V DC Housing cross-section (incl. system connection): 15 mm x 32 mm Maximum demand rate: 34 /min (EN ISO 13849) Response time: ≤ 13 ms Safe SICK device communication via EFI/SDL: - Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Switching current: 300 mA Display elements: LEDs Typical range: 0 m ... 8 m Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Protective field height: 720 mm Beam coding: + Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Weight: 255 g Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Permitted cable length: ≤ 20 m Restart interlock (delivery status): Deactivated Configuration method: Hard wired Type: Type 2 (IEC 61496) Connection type: Male connector M12, 5-pin Housing material: Aluminum alloy ALMGSI 0.5 External device monitoring (delivery status): Deactivated Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Ambient operating temperature: -20 °C ... +55 °C Enclosure rating: IP 65 (EN 60529) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Synchronization: Optical, without separate synchronization