Specification: Part Number 1207877 Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Connection type: Male connector M12, 5-pin Safe SICK device communication via EFI/SDL: - Protective field height: 780 mm Air humidity: 15 % ... 95 %, non-condensing Scanning range: 0 m ... 6 m Housing cross-section (incl. system connection): 15 mm x 32 mm Safety integrity level: SIL1 (IEC 61508
Specification: Part Number 1207972 Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Resolution: 34 mm Housing cross-section (incl. system connection): 15 mm x 32 mm Test rate (internal test): 58 /s Scanning range: 0 m ... 6 m Automatic beam coding: + Beam coding: + Safe SICK device communication via EFI/SDL: - Synchronization: Optical, without separate synchronization Safe state in the event of
Specification: Part Number 1207858 Scanning range: 0 m ... 6 m Safe SICK device communication via EFI/SDL: - Display elements: LEDs Typical range: 0 m ... 8 m Cascaded: - External device monitoring (EDM): + Test rate (internal test): 58 /s Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Housing cross-section (incl. system connection): 15 mm x 32 mm Protective field height: 780 mm Restart int
Specification: Part Number 1207814 Ripple: ≤ 10 % Cable length: 700 mm Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Housing cross-section (incl. system connection): 15 mm x 32 mm PFHd: Standalone system: 2.4 1E-08 (EN ISO 13849) Safe state in the event of a fault: At least one OSSD is in the OFF state. Response time: ≤ 17 ms Housing material: Aluminum alloy ALMGSI 0.5 Cascaded: - Switchi
Specification: Part Number 1207878 Automatic beam coding: + Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Air humidity: 15 % ... 95 %, non-condensing Scanning range: 0 m ... 6 m Ripple: ≤ 10 % Safe state in the event of a fault: At least one OSSD is in the OFF state. PFHd: Cascaded systems: 5.2 1E-08 (EN ISO 13849) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60
Specification: Part Number 1207973 Safe SICK device communication via EFI/SDL: - Ripple: ≤ 10 % Housing cross-section (incl. system connection): 15 mm x 32 mm Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Restart interlock: + Switching voltage LOW: 2 V DC Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061)
Specification: Part Number 1207859 Resolution: 34 mm Housing cross-section (incl. system connection): 15 mm x 32 mm Cable length: 700 mm Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Beam coding: + Restart interlock (delivery status): Deactivated Typical range: 0 m ... 8 m Enclosure rating: IP 65 (EN 60529) Shock resistance: 10 g, 16 ms (EN 60068-2-27) Configuration method: Hard wired Prot
Specification: Part Number 1207916 Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) External device monitoring (delivery status): Deactivated External device monitoring (EDM): + Enclosure rating: IP 65 (EN 60529) Response time: ≤ 13 ms Restart interlock (delivery status): Deactivated Beam coding: + Power consumption: ≤ 3 A Housing cross-section (incl. system connection): 15 mm x 32 mm
Specification: Part Number 1207936 External device monitoring (delivery status): Deactivated Protection class: III (EN 61140) Conductor cross-section: 0.34 mm² Protective field height: 900 mm Housing cross-section (incl. system connection): 15 mm x 32 mm Switching voltage LOW: 2 V DC Category: Category 2 (EN ISO 13849) Permitted cable length: ≤ 20 m Synchronization: Optical, without separate synchroni
Specification: Part Number 1207816 Ripple: ≤ 10 % Housing cross-section (incl. system connection): 15 mm x 32 mm Power consumption: ≤ 3 A Enclosure rating: IP 65 (EN 60529) Conductor cross-section: 0.34 mm² Permitted cable length: ≤ 20 m Housing material: Aluminum alloy ALMGSI 0.5 Synchronization: Optical, without separate synchronization Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-
Specification: Part Number 1207879 Housing cross-section (incl. system connection): 15 mm x 32 mm Maximum demand rate: 28 /min (EN ISO 13849) Storage temperature: -25 °C ... +70 °C Typical range: 0 m ... 8 m Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Cascaded: + Connection type extension connection: Female connector M12, 5-pin Shock resistance: 10 g, 16 ms (EN 60068-2-27) Integration via
Specification: Part Number 1207841 Response time: ≤ 13 ms Automatic beam coding: + Connection type: Male connector M12, 5-pin Weight: 320 g Scanning range: 0 m ... 6 m Configuration method: Hard wired Synchronization: Optical, without separate synchronization Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Permitted cable length: ≤ 20 m Type: Type 2 (IEC 61496) Test rate (internal test):
Specification: Part Number 1207974 Ripple: ≤ 10 % Safe state in the event of a fault: At least one OSSD is in the OFF state. Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Conductor cross-section: 0.34 mm² Restart interlock: + Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Cascaded: - Automatic beam coding:
Specification: Part Number 1207860 Housing cross-section (incl. system connection): 15 mm x 32 mm Synchronization: Optical, without separate synchronization Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Restart interlock (delivery status): Deactivated Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Scanning range: 0 m ... 6 m Response time: ≤ 13 ms Protection class: I
Specification: Part Number 1207917 Switching voltage LOW: 2 V DC Scanning range: 0 m ... 6 m Response time: ≤ 13 ms Automatic beam coding: + Configuration method: Hard wired Weight: 320 g Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Safe state in the event of a fault: At least one OSSD is in the OFF state. Category: Category 2 (EN ISO 13849) External device moni
Specification: Part Number 1207817 Type: Type 2 (IEC 61496) Test rate (internal test): 58 /s Permitted cable length: ≤ 20 m Restart interlock (delivery status): Deactivated External device monitoring (delivery status): Deactivated Resolution: 14 mm Maximum demand rate: 34 /min (EN ISO 13849) Beam coding: + Display elements: LEDs Safe state in the event of a fault: At least one OSSD is in the OFF s
Specification: Part Number 1207861 Category: Category 2 (EN ISO 13849) Connection type: Male connector M12, 5-pin Conductor cross-section: 0.34 mm² Ripple: ≤ 10 % Cascaded: - Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Automatic beam coding: + Scanning range: 0 m ... 6 m Housing material: Aluminum alloy ALMGSI 0.5 TM (mission time): 20 a (EN ISO 13849) Resolution: 34 mm Switching volt
Specification: Part Number 1207818 Switching current: 300 mA Maximum demand rate: 34 /min (EN ISO 13849) Cable length: 700 mm Safe state in the event of a fault: At least one OSSD is in the OFF state. Resolution: 14 mm Category: Category 2 (EN ISO 13849) Housing material: Aluminum alloy ALMGSI 0.5 Beam coding: + Restart interlock: + Type: Type 2 (IEC 61496) Ambient operating temperature: -20 °C .
Specification: Part Number 1207843 Safe state in the event of a fault: At least one OSSD is in the OFF state. Category: Category 2 (EN ISO 13849) Synchronization: Optical, without separate synchronization External device monitoring (EDM): + Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Storage temperature: -25 °C ... +70 °C Shock resistance: 10 g, 16 ms (EN 60068-2-27) Typ
Specification: Part Number 1207976 Shock resistance: 10 g, 16 ms (EN 60068-2-27) Safe SICK device communication via EFI/SDL: - Safe state in the event of a fault: At least one OSSD is in the OFF state. Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) External device monitoring (delivery status): Deactivated Connection type: Male connector M12, 5-pin Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6)
Specification: Part Number 1207862 Ambient operating temperature: -20 °C ... +55 °C Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Housing cross-section (incl. system connection): 15 mm x 32 mm Test rate (internal test): 58 /s Safe state in the event of a fault: At least one OSSD is in the OFF state. Automatic beam coding: + Protection class: III (EN 61140) External device
Specification: Part Number 1207919 Storage temperature: -25 °C ... +70 °C Protection class: III (EN 61140) Synchronization: Optical, without separate synchronization Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Protective field height: 1,020 mm Beam coding: + Enclosure rating: IP 65 (EN 60529) Response time: ≤ 13 ms Restart interlock: + Switching current: 300 mA Category: Categor
Specification: Part Number 1207939 Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Ambient operating temperature: -20 °C ... +55 °C Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Weight: 380 g Enclosure rating: IP 65 (EN 60529) Synchronization: Optical, without separate synchronization External device monitoring (delivery status): Deactivated Response time: ≤ 17 ms Configuration method:
Specification: Part Number 1207819 Safe SICK device communication via EFI/SDL: - Protection class: III (EN 61140) Test rate (internal test): 58 /s Cable length: 700 mm Safe state in the event of a fault: At least one OSSD is in the OFF state. Synchronization: Optical, without separate synchronization Restart interlock (delivery status): Deactivated Shock resistance: 10 g, 16 ms (EN 60068-2-27) Enclosure rat
Specification: Part Number 1207882 Category: Category 2 (EN ISO 13849) Beam coding: + Connection type extension connection: Female connector M12, 5-pin Safe SICK device communication via EFI/SDL: - Protective field height: 1,080 mm Restart interlock: + Switching current: 300 mA Housing material: Aluminum alloy ALMGSI 0.5 Air humidity: 15 % ... 95 %, non-condensing Housing cross-section (incl. system con
Specification: Part Number 1207863 External device monitoring (EDM): + Enclosure rating: IP 65 (EN 60529) Permitted cable length: ≤ 20 m Automatic beam coding: + Conductor cross-section: 0.34 mm² Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Resolution: 34 mm Protective field height: 1,080 mm Air humidity: 15 % ... 95 %, non-condensing Ripple: ≤ 10 % Typ
