C2MT-10814BBC03FE0

Specification: Part Number 1207819 Safe SICK device communication via EFI/SDL: - Protection class: III (EN 61140) Test rate (internal test): 58 /s Cable length: 700 mm Safe state in the event of a fault: At least one OSSD is in the OFF state. Synchronization: Optical, without separate synchronization Restart interlock (delivery status): Deactivated Shock resistance: 10 g, 16 ms (EN 60068-2-27) Enclosure rating: IP 65 (EN 60529) Switching voltage LOW: 2 V DC Beam coding: + Ripple: ≤ 10 % Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Weight: 380 g Housing material: Aluminum alloy ALMGSI 0.5 Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Air humidity: 15 % ... 95 %, non-condensing Scanning range: 0 m ... 6 m Response time: ≤ 17 ms External device monitoring (delivery status): Deactivated Ambient operating temperature: -20 °C ... +55 °C Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Display elements: LEDs Restart interlock: + Connection type: Male connector M12, 5-pin Storage temperature: -25 °C ... +70 °C External device monitoring (EDM): + Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Switching current: 300 mA Protective field height: 1,080 mm TM (mission time): 20 a (EN ISO 13849) Power consumption: ≤ 3 A Typical range: 0 m ... 8 m Conductor cross-section: 0.34 mm² Maximum demand rate: 34 /min (EN ISO 13849) Automatic beam coding: + Housing cross-section (incl. system connection): 15 mm x 32 mm Resolution: 14 mm Permitted cable length: ≤ 20 m Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Category: Category 2 (EN ISO 13849) Type: Type 2 (IEC 61496) Configuration method: Hard wired Cascaded: -