C2MT-12014BBC03FB0

Specification: Part Number 1207941 Connection type: Male connector M12, 5-pin Type: Type 2 (IEC 61496) Beam coding: + Cascaded: - Switching current: 300 mA Weight: 420 g Shock resistance: 10 g, 16 ms (EN 60068-2-27) Protective field height: 1,200 mm Conductor cross-section: 0.34 mm² Typical range: 0 m ... 8 m Display elements: LEDs Housing material: Aluminum alloy ALMGSI 0.5 TM (mission time): 20 a (EN ISO 13849) Storage temperature: -25 °C ... +70 °C Permitted cable length: ≤ 20 m Protection class: III (EN 61140) External device monitoring (delivery status): Deactivated Safe SICK device communication via EFI/SDL: - Safe state in the event of a fault: At least one OSSD is in the OFF state. Cable length: 700 mm Scanning range: 0 m ... 6 m Ambient operating temperature: -20 °C ... +55 °C Automatic beam coding: + Test rate (internal test): 58 /s Synchronization: Optical, without separate synchronization Category: Category 2 (EN ISO 13849) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Switching voltage LOW: 2 V DC Configuration method: Hard wired Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Housing cross-section (incl. system connection): 15 mm x 32 mm Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Power consumption: ≤ 3 A Maximum demand rate: 34 /min (EN ISO 13849) PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Ripple: ≤ 10 % Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Air humidity: 15 % ... 95 %, non-condensing External device monitoring (EDM): + Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Enclosure rating: IP 65 (EN 60529) Restart interlock (delivery status): Deactivated Resolution: 14 mm Restart interlock: + Response time: ≤ 17 ms