C2MT-12024BBC03FE0

Specification: Part Number 1207846 Display elements: LEDs Air humidity: 15 % ... 95 %, non-condensing Protective field height: 1,200 mm Conductor cross-section: 0.34 mm² Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Maximum demand rate: 34 /min (EN ISO 13849) Shock resistance: 10 g, 16 ms (EN 60068-2-27) External device monitoring (delivery status): Deactivated Protection class: III (EN 61140) External device monitoring (EDM): + Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Ripple: ≤ 10 % Enclosure rating: IP 65 (EN 60529) Housing material: Aluminum alloy ALMGSI 0.5 Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Weight: 420 g Test rate (internal test): 58 /s Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Automatic beam coding: + Beam coding: + Synchronization: Optical, without separate synchronization Configuration method: Hard wired Safe SICK device communication via EFI/SDL: - Cascaded: - Response time: ≤ 13 ms Switching voltage LOW: 2 V DC Connection type: Male connector M12, 5-pin Power consumption: ≤ 3 A Category: Category 2 (EN ISO 13849) Restart interlock: + Resolution: 24 mm Ambient operating temperature: -20 °C ... +55 °C Permitted cable length: ≤ 20 m Type: Type 2 (IEC 61496) Safe state in the event of a fault: At least one OSSD is in the OFF state. Restart interlock (delivery status): Deactivated TM (mission time): 20 a (EN ISO 13849) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Scanning range: 0 m ... 6 m Storage temperature: -25 °C ... +70 °C Typical range: 0 m ... 8 m Housing cross-section (incl. system connection): 15 mm x 32 mm Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Cable length: 700 mm Switching current: 300 mA