C2MT-12024BBC04FE0

Specification: Part Number 1207903 Resolution: 24 mm Scanning range: 0 m ... 6 m Permitted cable length: ≤ 20 m Storage temperature: -25 °C ... +70 °C Weight: 420 g Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Connection type extension connection: Female connector M12, 5-pin Shock resistance: 10 g, 16 ms (EN 60068-2-27) PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Cascaded: + Restart interlock: + TM (mission time): 20 a (EN ISO 13849) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Safe state in the event of a fault: At least one OSSD is in the OFF state. Configuration method: Hard wired Automatic beam coding: + Switching voltage LOW: 2 V DC Conductor cross-section: 0.34 mm² Cable length: 700 mm Protection class: III (EN 61140) Air humidity: 15 % ... 95 %, non-condensing Safe SICK device communication via EFI/SDL: - Switching current: 300 mA Type: Type 2 (IEC 61496) Protective field height: 1,200 mm Test rate (internal test): 47 /s Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) External device monitoring (delivery status): Deactivated Enclosure rating: IP 65 (EN 60529) Response time: ≤ 13 ms Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Typical range: 0 m ... 8 m Maximum demand rate: 28 /min (EN ISO 13849) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Beam coding: + Power consumption: ≤ 3 A Ambient operating temperature: -20 °C ... +55 °C Display elements: LEDs Housing material: Aluminum alloy ALMGSI 0.5 Category: Category 2 (EN ISO 13849) Housing cross-section (incl. system connection): 15 mm x 32 mm Restart interlock (delivery status): Deactivated Connection type: Male connector M12, 5-pin Ripple: ≤ 10 % Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) External device monitoring (EDM): + Synchronization: Optical, without separate synchronization Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored