C2MT-12034BBC03FB0

Specification: Part Number 1207979 Restart interlock: + Shock resistance: 10 g, 16 ms (EN 60068-2-27) Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Category: Category 2 (EN ISO 13849) Connection type: Male connector M12, 5-pin External device monitoring (EDM): + Ambient operating temperature: -20 °C ... +55 °C Test rate (internal test): 58 /s TM (mission time): 20 a (EN ISO 13849) Synchronization: Optical, without separate synchronization Type: Type 2 (IEC 61496) Housing material: Aluminum alloy ALMGSI 0.5 Protective field height: 1,200 mm Cascaded: - Response time: ≤ 13 ms Power consumption: ≤ 3 A Resolution: 34 mm Configuration method: Hard wired Switching current: 300 mA Safe state in the event of a fault: At least one OSSD is in the OFF state. Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Housing cross-section (incl. system connection): 15 mm x 32 mm Ripple: ≤ 10 % Enclosure rating: IP 65 (EN 60529) Cable length: 700 mm Permitted cable length: ≤ 20 m External device monitoring (delivery status): Deactivated Maximum demand rate: 34 /min (EN ISO 13849) Protection class: III (EN 61140) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Weight: 420 g Display elements: LEDs Storage temperature: -25 °C ... +70 °C Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Beam coding: + Air humidity: 15 % ... 95 %, non-condensing Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Automatic beam coding: + Safe SICK device communication via EFI/SDL: - Scanning range: 0 m ... 6 m Typical range: 0 m ... 8 m Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Conductor cross-section: 0.34 mm² Restart interlock (delivery status): Deactivated Switching voltage LOW: 2 V DC