C2MT-10814BBC04FE0

Specification: Part Number 1207882 Category: Category 2 (EN ISO 13849) Beam coding: + Connection type extension connection: Female connector M12, 5-pin Safe SICK device communication via EFI/SDL: - Protective field height: 1,080 mm Restart interlock: + Switching current: 300 mA Housing material: Aluminum alloy ALMGSI 0.5 Air humidity: 15 % ... 95 %, non-condensing Housing cross-section (incl. system connection): 15 mm x 32 mm Weight: 380 g Protection class: III (EN 61140) External device monitoring (EDM): + Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Ripple: ≤ 10 % Conductor cross-section: 0.34 mm² Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Configuration method: Hard wired Type: Type 2 (IEC 61496) Cable length: 700 mm Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Response time: ≤ 17 ms Restart interlock (delivery status): Deactivated Display elements: LEDs Connection type: Male connector M12, 5-pin Typical range: 0 m ... 8 m External device monitoring (delivery status): Deactivated Synchronization: Optical, without separate synchronization Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Automatic beam coding: + Permitted cable length: ≤ 20 m Safe state in the event of a fault: At least one OSSD is in the OFF state. PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Resolution: 14 mm Test rate (internal test): 47 /s Shock resistance: 10 g, 16 ms (EN 60068-2-27) Scanning range: 0 m ... 6 m Storage temperature: -25 °C ... +70 °C Enclosure rating: IP 65 (EN 60529) TM (mission time): 20 a (EN ISO 13849) Maximum demand rate: 28 /min (EN ISO 13849) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Ambient operating temperature: -20 °C ... +55 °C Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Switching voltage LOW: 2 V DC Power consumption: ≤ 3 A Cascaded: +