C2MT-10814BBC03FB0

Specification: Part Number 1207939 Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Ambient operating temperature: -20 °C ... +55 °C Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Weight: 380 g Enclosure rating: IP 65 (EN 60529) Synchronization: Optical, without separate synchronization External device monitoring (delivery status): Deactivated Response time: ≤ 17 ms Configuration method: Hard wired Protective field height: 1,080 mm Permitted cable length: ≤ 20 m Beam coding: + Safe state in the event of a fault: At least one OSSD is in the OFF state. Scanning range: 0 m ... 6 m Test rate (internal test): 58 /s Restart interlock: + Safe SICK device communication via EFI/SDL: - External device monitoring (EDM): + Type: Type 2 (IEC 61496) Switching current: 300 mA Restart interlock (delivery status): Deactivated Conductor cross-section: 0.34 mm² Typical range: 0 m ... 8 m Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Housing material: Aluminum alloy ALMGSI 0.5 Protection class: III (EN 61140) Air humidity: 15 % ... 95 %, non-condensing Housing cross-section (incl. system connection): 15 mm x 32 mm Cascaded: - Storage temperature: -25 °C ... +70 °C TM (mission time): 20 a (EN ISO 13849) Power consumption: ≤ 3 A Resolution: 14 mm Maximum demand rate: 34 /min (EN ISO 13849) Automatic beam coding: + Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Shock resistance: 10 g, 16 ms (EN 60068-2-27) Ripple: ≤ 10 % Connection type: Male connector M12, 5-pin Category: Category 2 (EN ISO 13849) Switching voltage LOW: 2 V DC Display elements: LEDs Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Cable length: 700 mm Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061)