C2MT-09014BBC04FE0

Specification: Part Number 1207879 Housing cross-section (incl. system connection): 15 mm x 32 mm Maximum demand rate: 28 /min (EN ISO 13849) Storage temperature: -25 °C ... +70 °C Typical range: 0 m ... 8 m Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Cascaded: + Connection type extension connection: Female connector M12, 5-pin Shock resistance: 10 g, 16 ms (EN 60068-2-27) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Housing material: Aluminum alloy ALMGSI 0.5 Conductor cross-section: 0.34 mm² Response time: ≤ 17 ms Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Scanning range: 0 m ... 6 m Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Switching voltage LOW: 2 V DC Ripple: ≤ 10 % Connection type: Male connector M12, 5-pin Test rate (internal test): 47 /s Restart interlock: + Configuration method: Hard wired Weight: 320 g Category: Category 2 (EN ISO 13849) Ambient operating temperature: -20 °C ... +55 °C Switching current: 300 mA Protection class: III (EN 61140) Cable length: 700 mm Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Beam coding: + Permitted cable length: ≤ 20 m Enclosure rating: IP 65 (EN 60529) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Safe SICK device communication via EFI/SDL: - Resolution: 14 mm Display elements: LEDs Safe state in the event of a fault: At least one OSSD is in the OFF state. External device monitoring (delivery status): Deactivated Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Synchronization: Optical, without separate synchronization External device monitoring (EDM): + Air humidity: 15 % ... 95 %, non-condensing PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) TM (mission time): 20 a (EN ISO 13849) Restart interlock (delivery status): Deactivated Protective field height: 900 mm Power consumption: ≤ 3 A Automatic beam coding: + Type: Type 2 (IEC 61496)