C2MT-09014BBC03FE0

Specification: Part Number 1207816 Ripple: ≤ 10 % Housing cross-section (incl. system connection): 15 mm x 32 mm Power consumption: ≤ 3 A Enclosure rating: IP 65 (EN 60529) Conductor cross-section: 0.34 mm² Permitted cable length: ≤ 20 m Housing material: Aluminum alloy ALMGSI 0.5 Synchronization: Optical, without separate synchronization Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Ambient operating temperature: -20 °C ... +55 °C Display elements: LEDs Type: Type 2 (IEC 61496) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Air humidity: 15 % ... 95 %, non-condensing Beam coding: + Configuration method: Hard wired TM (mission time): 20 a (EN ISO 13849) Connection type: Male connector M12, 5-pin Weight: 320 g Restart interlock: + Test rate (internal test): 58 /s Protective field height: 900 mm External device monitoring (delivery status): Deactivated Switching voltage LOW: 2 V DC Storage temperature: -25 °C ... +70 °C Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Safe state in the event of a fault: At least one OSSD is in the OFF state. Cascaded: - Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Automatic beam coding: + Safe SICK device communication via EFI/SDL: - Resolution: 14 mm Category: Category 2 (EN ISO 13849) Typical range: 0 m ... 8 m Response time: ≤ 17 ms Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Scanning range: 0 m ... 6 m Shock resistance: 10 g, 16 ms (EN 60068-2-27) External device monitoring (EDM): + Maximum demand rate: 34 /min (EN ISO 13849) Cable length: 700 mm Protection class: III (EN 61140) Restart interlock (delivery status): Deactivated PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Switching current: 300 mA