C2MT-08434BBC04FE0

Specification: Part Number 1207916 Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) External device monitoring (delivery status): Deactivated External device monitoring (EDM): + Enclosure rating: IP 65 (EN 60529) Response time: ≤ 13 ms Restart interlock (delivery status): Deactivated Beam coding: + Power consumption: ≤ 3 A Housing cross-section (incl. system connection): 15 mm x 32 mm Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Protective field height: 840 mm Cable length: 700 mm Typical range: 0 m ... 8 m Synchronization: Optical, without separate synchronization Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Connection type: Male connector M12, 5-pin Category: Category 2 (EN ISO 13849) Housing material: Aluminum alloy ALMGSI 0.5 Display elements: LEDs Permitted cable length: ≤ 20 m Switching voltage LOW: 2 V DC Storage temperature: -25 °C ... +70 °C Cascaded: + Maximum demand rate: 28 /min (EN ISO 13849) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Scanning range: 0 m ... 6 m Weight: 300 g PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Conductor cross-section: 0.34 mm² Type: Type 2 (IEC 61496) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Configuration method: Hard wired Connection type extension connection: Female connector M12, 5-pin Safe state in the event of a fault: At least one OSSD is in the OFF state. Protection class: III (EN 61140) Switching current: 300 mA Test rate (internal test): 47 /s Air humidity: 15 % ... 95 %, non-condensing Ripple: ≤ 10 % TM (mission time): 20 a (EN ISO 13849) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Shock resistance: 10 g, 16 ms (EN 60068-2-27) Safe SICK device communication via EFI/SDL: - Automatic beam coding: + Ambient operating temperature: -20 °C ... +55 °C Resolution: 34 mm Restart interlock: +