C2MT-09034BBC04FE0

Specification: Part Number 1207917 Switching voltage LOW: 2 V DC Scanning range: 0 m ... 6 m Response time: ≤ 13 ms Automatic beam coding: + Configuration method: Hard wired Weight: 320 g Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Safe state in the event of a fault: At least one OSSD is in the OFF state. Category: Category 2 (EN ISO 13849) External device monitoring (EDM): + Type: Type 2 (IEC 61496) Synchronization: Optical, without separate synchronization Housing material: Aluminum alloy ALMGSI 0.5 Restart interlock: + Test rate (internal test): 47 /s Storage temperature: -25 °C ... +70 °C Display elements: LEDs Cascaded: + Enclosure rating: IP 65 (EN 60529) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Conductor cross-section: 0.34 mm² Air humidity: 15 % ... 95 %, non-condensing Housing cross-section (incl. system connection): 15 mm x 32 mm Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Ripple: ≤ 10 % Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Switching current: 300 mA Shock resistance: 10 g, 16 ms (EN 60068-2-27) Protective field height: 900 mm Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Protection class: III (EN 61140) Connection type: Male connector M12, 5-pin Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Cable length: 700 mm External device monitoring (delivery status): Deactivated Restart interlock (delivery status): Deactivated Connection type extension connection: Female connector M12, 5-pin Resolution: 34 mm Safe SICK device communication via EFI/SDL: - TM (mission time): 20 a (EN ISO 13849) Maximum demand rate: 28 /min (EN ISO 13849) Beam coding: + PFHd: Cascaded systems: 5.2  1E-08 (EN ISO 13849) Power consumption: ≤ 3 A Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Permitted cable length: ≤ 20 m Typical range: 0 m ... 8 m Ambient operating temperature: -20 °C ... +55 °C