C2MT-09624BBC03FE0

Specification: Part Number 1207842 Air humidity: 15 % ... 95 %, non-condensing Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Protective field height: 960 mm Cascaded: - Housing material: Aluminum alloy ALMGSI 0.5 Conductor cross-section: 0.34 mm² Maximum demand rate: 34 /min (EN ISO 13849) Restart interlock: + Category: Category 2 (EN ISO 13849) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Test rate (internal test): 58 /s Permitted cable length: ≤ 20 m Resolution: 24 mm Cable length: 700 mm Ambient operating temperature: -20 °C ... +55 °C Protection class: III (EN 61140) Connection type: Male connector M12, 5-pin Switching current: 300 mA External device monitoring (delivery status): Deactivated Response time: ≤ 13 ms Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Switching voltage LOW: 2 V DC Scanning range: 0 m ... 6 m Safe SICK device communication via EFI/SDL: - Safe state in the event of a fault: At least one OSSD is in the OFF state. Display elements: LEDs Enclosure rating: IP 65 (EN 60529) Restart interlock (delivery status): Deactivated Beam coding: + Automatic beam coding: + Typical range: 0 m ... 8 m TM (mission time): 20 a (EN ISO 13849) Configuration method: Hard wired Power consumption: ≤ 3 A Type: Type 2 (IEC 61496) Ripple: ≤ 10 % PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Synchronization: Optical, without separate synchronization Weight: 340 g External device monitoring (EDM): + Shock resistance: 10 g, 16 ms (EN 60068-2-27) Storage temperature: -25 °C ... +70 °C Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Housing cross-section (incl. system connection): 15 mm x 32 mm