C2MT-10214BBC03FE0

Specification: Part Number 1207818 Switching current: 300 mA Maximum demand rate: 34 /min (EN ISO 13849) Cable length: 700 mm Safe state in the event of a fault: At least one OSSD is in the OFF state. Resolution: 14 mm Category: Category 2 (EN ISO 13849) Housing material: Aluminum alloy ALMGSI 0.5 Beam coding: + Restart interlock: + Type: Type 2 (IEC 61496) Ambient operating temperature: -20 °C ... +55 °C Synchronization: Optical, without separate synchronization Configuration method: Hard wired Weight: 360 g Cascaded: - Restart interlock (delivery status): Deactivated Typical range: 0 m ... 8 m Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Connection type: Male connector M12, 5-pin PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Automatic beam coding: + Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Storage temperature: -25 °C ... +70 °C Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Permitted cable length: ≤ 20 m Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Enclosure rating: IP 65 (EN 60529) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Housing cross-section (incl. system connection): 15 mm x 32 mm Test rate (internal test): 58 /s Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Protective field height: 1,020 mm Safe SICK device communication via EFI/SDL: - Display elements: LEDs Ripple: ≤ 10 % Conductor cross-section: 0.34 mm² Response time: ≤ 17 ms Scanning range: 0 m ... 6 m External device monitoring (delivery status): Deactivated Switching voltage LOW: 2 V DC Protection class: III (EN 61140) Shock resistance: 10 g, 16 ms (EN 60068-2-27) Power consumption: ≤ 3 A Air humidity: 15 % ... 95 %, non-condensing External device monitoring (EDM): + TM (mission time): 20 a (EN ISO 13849)