Protection DIN EN 60529 IP 54 (without shaft seal) IP 65 (with shaft seal) Admitted shaft load ≤20 N axial ≤40 N radial Connection Bus cover Device adress Rotary switch in bus cover (type-specific) Resistance DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms Status indicator DUO-LED integrated in bus cover Function Multiturn Steps per turn ≤8192 / 13 bit Out
GXMMW.0203P33 Incremental encoder with solid shaft and synchro flange, optical. Catalogue number 11032550. The main characteristics of GXMMW.0203P33 : Housing ø58 mm Clamping flange: ø10 mm IP 54; Interface: Profibus-DPV0 / cable gland; Voltage supply 10...30 VDC; Pulses per revolution 2048; Dimensions (flange) 60 x 72 mm; Voltage supply: 8...26 VDC / HTL level, push pull.
Code sequence CW/CCW coded by connection Size (flange) ø75 mm Initializing time typ. 50 ms after power on Operating speed ≤6000 rpm (mechanical) ≤6000 rpm (electric) manufacter SKU GXN1H Number of cams 250 Voltage supply 10...30 VDC Protection DIN EN 60529 IP 54 Reverse polarity protection Yes Diagnostic functions Code continuity check Signal frequency exceeded Materials Hou
Approval UL approval / E63076 Absolute accuracy ±0.03 ° Flange Clamping or synchro flange Number of cams 250 Initializing time typ. 50 ms after power on Resistance DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms Starting torque ≤0.015 Nm (IP 54) ≤0.03 Nm (IP 65) Shaft type ø10 mm solid shaft (clamping flange) ø6 mm solid shaft (synchro flange)
Operating speed ≤6000 rpm (mechanical) ≤6000 rpm (electric) Protection DIN EN 60529 IP 54 Rotor moment of inertia 20 gcm² Materials Housing: steel Flange: aluminium Relative humidity 95 % non-condensing Voltage supply 10...30 VDC Connection Cable 1 m, connector DSUB, 37pin Interference immunity DIN EN 61000-6-2 Function Multiturn Steps per turn ≤4096 / 12 bit Diagnostic fun
Admitted shaft load ≤20 N axial ≤40 N radial Inputs TxD, RxD (RS232) Control signals UP/ DOWN and zero ENABLE STORE manufacter SKU GXP1W - parallel Reverse polarity protection Yes Operating speed ≤10000 rpm (mechanical) ≤6000 rpm (electric) Shaft type ø10 mm solid shaft (clamping flange) ø6 mm solid shaft (synchro flange) Operating temperature -25...+70 °C Code Gray, cut gr
Rotor moment of inertia 20 gcm² Identifier 11 bit Approval UL approval / E63076 Resistance DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 100 g, 4 ms Transmission rate 10...1000 kBaud Operating mode Event-triggered / Time-triggered Remotely-requested Sync (cyclic) / Sync (acyclic) Number of turns ≤65536 / 16 bit Operating temperature -25...+85 °C -40...+85 °C (optional
Transmission rate 500 kBaud Programmable parameters Total resolution Rotating direction and code Preset and offset Zero point setting Interface Interbus Output stages RS485 Rotor moment of inertia 20 gcm² Operating speed ≤6000 rpm (mechanical) ≤6000 rpm (electric) Sensing method Optical Emitted interference DIN EN 61000-6-4 manufacter SKU GXP6H - Interbus Interference immunity DIN
Number of turns ≤4096 / 12 bit Rotor moment of inertia 20 gcm² Initializing time typ. 50 ms after power on Transmission rate 500 kBaud Shaft type ø10 mm solid shaft (clamping flange) ø6 mm solid shaft (synchro flange) Output stages RS485 Sensing method Optical Consumption w/o load ≤60 mA (24 VDC) Voltage supply 10...30 VDC Absolute accuracy ±0.025 ° Code Gray
Resistance IEC 60068-2-6 Vibration 10 g, 10-2000 Hz IEC 60068-2-27 Shock 100 g, 6 ms Emitted interference EN 61000-6-3 Output frequency ≤120 kHz Operating temperature -30...+100 °C Size (flange) ø158 mm Sensing method Optical manufacter SKU HG 16 Approvals CE UL approval / E256710 Radial tolerance ±0.05 mm (with zero pulse) ±0.2 mm (without zero pulse) Pulses per revolution 250.
Rotor moment of inertia 18 gcm² Shaft type ø12...16 mm (blind hollow shaft) Operating speed ≤12000 rpm ≤30000 rpm (option) Resistance IEC 60068-2-6 Vibration 10 g, 10-2000 Hz IEC 60068-2-27 Shock 100 g, 6 ms Phase shift 90° ±20° Output frequency ≤120 kHz Scan ratio 40...60 % Weight approx. 180 g Protection DIN EN 60529 IP 55 (≤12000 U/min) IP 23 (≤30000 rpm) Int
Shaft type ø16...20 mm (blind hollow shaft) ø17 mm (cone shaft 1:10) Status indicator DUO-LED integrated in bus cover Voltage supply 9...30 VDC Inputs SSI clock (version SSI) manufacter SKU HMG 11 Profile conformity Profibus-DPV0 CANopen® CiA DSP 406 V 3.0 Device Profile Encoder V 1.0 Encoder profile PNO 3.162 Operating temperature -20...+85 °C Approvals CE UL approval / E256710 Operat
Switching delay time ≤40 ms Interference immunity EN 61000-6-2 Number of turns ≤65536 / 16 bit Consumption w/o load ≤5 mA Size (flange) ø122 mm Connection Bus cover Terminal box or flange connector M23, 12 pin (SSI/incremental) Resistance IEC 60068-2-6 Vibration 5 g, 10-2000 Hz IEC 60068-2-27 Shock 50 g, 11 ms Steps per turn 8192 / 13 bit Switching hysteresis =30 % of switching s
Emitted interference EN 61000-6-3 Device adress Rotary switch in bus cover Code Gray (version SSI) Function Multiturn Initializing time ≤200 ms after power on Size (flange) ø122 mm Range of switching speed (ns) 850...2800 rpm (Δn = 2 rpm/s) Diagnostic function Position or parameter error Profile conformity Profibus-DPV0 CANopen® CiA DSP 406 V 3.0 Device Profile Encoder V 1.0
Rotor moment of inertia 340 gcm² Explosion protection II 3 G Ex nA IIC T4 Gc (gas) II 3 D Ex tc IIIC T135°C Dc (dust) Reference signal Zero pulse, width 90° Materials Housing: aluminium die-cast Shaft: stainless steel Protection DIN EN 60529 IP 66 Sensing method Optical Shaft type ø12...20 mm (blind hollow shaft) ø17 mm (cone shaft 1:10) Operating torque typ. 6 Ncm manufacter SK
Switching delay time ≤40 ms Resistance IEC 60068-2-6 Vibration 10 g, 10-2000 Hz IEC 60068-2-27 Shock 200 g, 6 ms Size (flange) ø105 mm Phase shift 90° ±20° Voltage supply 9...30 VDC Reference signal Zero pulse, width 90° Approval CE Switching accuracy ±2 % (Digit) Emitted interference EN 61000-6-3 Admitted shaft load ≤450 N axial ≤600 N radial Rotor moment of inert
Speed (n) ≤6000 rpm Operating temperature -30...+85 °C HOG 10 + DSL.R output signals K1, K2, K0 + inverted Connection Terminal box Size (flange) ø105 mm Switching outputs 3 outputs, speed control Protection DIN EN 60529 IP 66 Sensing method Optical Reference signal Zero pulse, width 90° Switching delay time ≤40 ms Output frequency ≤120 kHz Explosion protection I
Switching hysteresis =30 % of switching speed Output stages HTL-P (power linedriver) TTL/RS422 Output frequency ≤120 kHz ≤300 kHz (on request) manufacter SKU HOG 10 + ESL 90 Operating temperature -20...+85 °C Switching delay time ≤40 ms Transmission length ≤350 m at 100 kHz (HTL-P) ≤550 m at 100 kHz (TTL) Range of switching speed (ns) 650...6000 rpm Switching outputs 1 output, speed
Shaft insulation 2.8 kV Voltage supply 12 VDC ±10 % Consumption w/o load ≤5 mA Shaft type ø16...20 mm (blind hollow shaft) ø17 mm (cone shaft 1:10) Operating temperature -20...+85 °C Rotor moment of inertia 680 gcm² Operating speed ≤5000 rpm Protection DIN EN 60529 IP 66 Size (flange) ø105 mm Weight approx. 2.3 kg 2.5 kg (with option M) Pulses per revolu
Incremental encoders - combination HOG 10 + FSL TTL output driver for cable length up to 550 m Mechanical speed monitoring based on centrifugal force Hybrid bearing for extended service life Terminal boxes, turn by 180°
INCREMENTAL ENCODER ø12...20 mm (blind hollow shaft), ø17 mm (cone shaft 1:10). Optical sensing, blind hollow shaft. Catalogue number 700000682675. Incremental encoders Baumer Hubner HOG 10 DN 1024 I series are designed for equipment where very high resistance to shock and vibrations are required. Also they have hybrid bearing for extended lifetime. The main characteristics of HOG 10 DN 1024
