GXP5W - CANopen®

Absolute accuracy ±0.025 ° Connection Connector M12, 5-pin Connector M23, 12-pin Connector D-SUB, 9-pin Transmission rate 10...1000 kBaud Admitted shaft load ≤20 N axial ≤40 N radial Number of turns ≤65536 / 16 bit Rotor moment of inertia 20 gcm² Status indicator DUO-LED integrated in housing Profile conformity CANopen® CiA DSP 406 V 3.0 CANopen® CiA DSP 417 Lift Starting acceleration ≤1000 U/s² Resistance DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms Interference immunity DIN EN 61000-6-2 Size (flange) ø58 mm Function Multiturn Voltage supply 10...30 VDC Diagnostic functions Position or parameter error Multiturn sensing Weight approx. 500 g Operating temperature -25...+85 °C -40...+85 °C (optional) Sensing method Optical Consumption w/o load ≤50 mA (24 VDC) Initializing time typ. 250 ms after power on Starting torque ≤0.015 Nm (IP 54) ≤0.03 Nm (IP 65) Operating speed ≤10000 rpm (mechanical) ≤6000 rpm (electric) Output stages CAN bus standard ISO / DIS 11898 Code Binary Steps per turn ≤8192 / 13 bit Reverse polarity protection Yes Operating mode Event-triggered / Time-triggered Remotely-requested Sync (cyclic) / Sync (acyclic) Relative humidity 95 % non-condensing manufacter SKU GXP5W - CANopen® Approval UL approval / E63076 Emitted interference DIN EN 61000-6-4 Materials Housing: steel Flange: aluminium Interfaces CANopen® CANopen®-Lift Programmable parameters Operating modes Total resolution Scaling Rotation speed monitoring Shaft type ø10 mm solid shaft (clamping flange) ø6 mm solid shaft (synchro flange) Flange Clamping or synchro flange Code sequence CW/CCW programmable Identifier 11 bit Protection DIN EN 60529 IP 54 (without shaft seal) IP 65 (with shaft seal)