GXP1H - parallel

Operating speed ≤6000 rpm (mechanical) ≤6000 rpm (electric) Protection DIN EN 60529 IP 54 Rotor moment of inertia 20 gcm² Materials Housing: steel Flange: aluminium Relative humidity 95 % non-condensing Voltage supply 10...30 VDC Connection Cable 1 m, connector DSUB, 37pin Interference immunity DIN EN 61000-6-2 Function Multiturn Steps per turn ≤4096 / 12 bit Diagnostic functions Self-diagnosis Code continuity check Multiturn sensing Sensing method Optical Consumption w/o load ≤50 mA (24 VDC) Output stages PNP or NPN open collector manufacter SKU GXP1H - parallel Weight approx. 700 g Programmable parameters Steps per revolution Number of revolutions Code 2 presets (limits) Rotation speed monitoring Size (flange) ø75 mm Operating temperature -25...+70 °C Code sequence CW/CCW coded by connection Interface 24 parallel outputs Shaft type ø14 mm (through hollow shaft) Initializing time typ. 50 ms after power on Absolute accuracy ±0.03 ° Reverse polarity protection Yes Approval UL approval / E63076 Programming interface RS232 Code Gray, cut gray, BCD, binary programmable Emitted interference DIN EN 61000-6-4 Resistance DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms Number of turns ≤4096 / 12 bit Starting torque ≤0.05 Nm (IP 54) Inputs TxD, RxD (RS232) Control signals UP/ DOWN and zero ENABLE STORE