GXN1W

Approval UL approval / E63076 Absolute accuracy ±0.03 ° Flange Clamping or synchro flange Number of cams 250 Initializing time typ. 50 ms after power on Resistance DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms Starting torque ≤0.015 Nm (IP 54) ≤0.03 Nm (IP 65) Shaft type ø10 mm solid shaft (clamping flange) ø6 mm solid shaft (synchro flange) Size (flange) ø58 mm Interfaces Parallel (cams) 5 special outputs programmable Operating speed ≤10000 rpm (mechanical) ≤6000 rpm (electric) Operating temperature -25...+70 °C Sensing method Optical Reverse polarity protection Yes Steps per turn ≤4096 / 12 bit Rotor moment of inertia 20 gcm² Interference immunity DIN EN 61000-6-2 manufacter SKU GXN1W Protection DIN EN 60529 IP 54 (without shaft seal) IP 65 (with shaft seal) Code Binary Consumption w/o load ≤50 mA (24 VDC) Relative humidity 95 % non-condensing Programming interface RS232 Weight approx. 700 g Code sequence CW/CCW coded by connection Voltage supply 10...30 VDC Number of turns ≤4096 / 12 bit Programmable parameters Steps per revolution Number of revolutions Code 2 presets (limits) Rotation speed monitoring Output stages PNP or NPN open collector Emitted interference DIN EN 61000-6-4 Admitted shaft load ≤20 N axial ≤40 N radial Materials Housing: steel Flange: aluminium Connection Cable 1 m, connector DSUB, 37pin Inputs TxD, RxD (RS232) Control signals UP/ DOWN and zero ENABLE Diagnostic functions Self-diagnosis Code continuity check Multiturn sensing Function Multiturn