GXP1W - parallel

Admitted shaft load ≤20 N axial ≤40 N radial Inputs TxD, RxD (RS232) Control signals UP/ DOWN and zero ENABLE STORE manufacter SKU GXP1W - parallel Reverse polarity protection Yes Operating speed ≤10000 rpm (mechanical) ≤6000 rpm (electric) Shaft type ø10 mm solid shaft (clamping flange) ø6 mm solid shaft (synchro flange) Operating temperature -25...+70 °C Code Gray, cut gray, BCD, binary programmable Rotor moment of inertia 20 gcm² Relative humidity 95 % non-condensing Flange Clamping or synchro flange Interference immunity DIN EN 61000-6-2 Code sequence CW/CCW coded and programmable by connection Emitted interference DIN EN 61000-6-4 Absolute accuracy ±0.03 ° Sensing method Optical Protection DIN EN 60529 IP 54 (without shaft seal) IP 65 (with shaft seal) Voltage supply 10...30 VDC Diagnostic functions Self-diagnosis Code continuity check Multiturn sensing Starting torque ≤0.015 Nm (IP 54) ≤0.03 Nm (IP 65) Function Multiturn Number of turns ≤4096 / 12 bit Programming interface RS232 Interface 24 parallel outputs Initializing time typ. 50 ms after power on Output stages PNP or NPN open collector Weight approx. 600 g Programmable parameters Steps per revolution Number of revolutions Code 2 presets (limits) Rotation speed monitoring Connection Cable 1 m, connector DSUB, 37pin Steps per turn ≤4096 / 12 bit Resistance DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms Size (flange) ø58 mm Consumption w/o load ≤50 mA (24 VDC) Approval UL approval / E63076 Materials Housing: steel Flange: aluminium