GXP6W - Interbus

Number of turns ≤4096 / 12 bit Rotor moment of inertia 20 gcm² Initializing time typ. 50 ms after power on Transmission rate 500 kBaud Shaft type ø10 mm solid shaft (clamping flange) ø6 mm solid shaft (synchro flange) Output stages RS485 Sensing method Optical Consumption w/o load ≤60 mA (24 VDC) Voltage supply 10...30 VDC Absolute accuracy ±0.025 ° Code Gray or binary Programmable parameters Total resolution Rotating direction and code Preset and offset Zero point setting Size (flange) ø58 mm Profile conformity Encoder profile 71 Code sequence CW default, programmable Interface Interbus Resistance DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms Steps per turn ≤8192 / 13 bit Materials Housing: aluminium Flange: aluminium manufacter SKU GXP6W - Interbus Function Multiturn Approval UL approval / E63076 Weight approx. 600 g Admitted shaft load ≤20 N axial ≤40 N radial Protection DIN EN 60529 IP 54 (without shaft seal) IP 65 (with shaft seal) Flange Clamping or synchro flange Interference immunity DIN EN 61000-6-2 Starting torque ≤0.015 Nm (IP 54) ≤0.03 Nm (IP 65) Emitted interference DIN EN 61000-6-4 Operating speed ≤10000 rpm (mechanical) ≤6000 rpm (electric) Operating temperature -25...+85 °C -40...+85 °C (optional) Connection Connector M23, 2 x 9-pin Reverse polarity protection Yes Relative humidity 95 % non-condensing