GXP8W - DeviceNet

Steps per turn ≤8192 / 13 bit Starting acceleration ≤1000 U/s² Operating speed ≤10000 rpm (mechanical) ≤6000 rpm (electric) Relative humidity 95 % non-condensing Voltage supply 10...30 VDC Interface DeviceNet Rotor moment of inertia 20 gcm² Transmission rate 125...500 kBaud Function Multiturn Resistance DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms Admitted shaft load ≤20 N axial ≤40 N radial Code Binary Shaft type ø10 mm solid shaft (clamping flange) ø6 mm solid shaft (synchro flange) Programmable parameters Operating modes Total resolution Preset Scaling Emitted interference DIN EN 61000-6-4 Operating temperature -25...+85 °C -40...+85 °C (optional) Code sequence CW default, programmable Operating mode I/O-Polling, Cyclic, Change of State Approval UL approval / E63076 Interference immunity DIN EN 61000-6-2 Materials Housing: steel Flange: aluminium Consumption w/o load ≤50 mA (24 VDC) Flange Clamping or synchro flange Number of turns ≤65536 / 16 bit Profile conformity Device Profile Encoder V 1.0 Reverse polarity protection Yes Diagnostic functions Position or parameter error Multiturn sensing Output stages CAN bus standard ISO / DIS 11898 Starting torque ≤0.015 Nm (IP 54) ≤0.03 Nm (IP 65) Size (flange) ø58 mm Absolute accuracy ±0.025 ° Connection Connector M12, 5-pin Weight approx. 350 g manufacter SKU GXP8W - DeviceNet Initializing time typ. 250 ms after power on Protection DIN EN 60529 IP 54 (without shaft seal) IP 65 (with shaft seal) Sensing method Optical Identifier 11 bit Status indicator DUO-LED integrated in housing