HOG 10 + ESL 90

Switching hysteresis =30 % of switching speed Output stages HTL-P (power linedriver) TTL/RS422 Output frequency ≤120 kHz ≤300 kHz (on request) manufacter SKU HOG 10 + ESL 90 Operating temperature -20...+85 °C Switching delay time ≤40 ms Transmission length ≤350 m at 100 kHz (HTL-P) ≤550 m at 100 kHz (TTL) Range of switching speed (ns) 650...6000 rpm Switching outputs 1 output, speed control Switching accuracy ±4 % (≤1500 rpm) ±2 % (>1500 rpm) Rotor moment of inertia 680 gcm² HOG 10 + ESL 90 output signals K1, K2, K0 + inverted Error output (only EMS) Size (flange) ø105 mm Emitted interference EN 61000-6-3 Weight approx. 2.3 kg 2.5 kg (with option M) Operating torque typ. 6 Ncm Output switching capacity ≤6 A / 250 VAC; ≤1 A / 48 VDC Phase shift 90° ±20° Reference signal Zero pulse, width 90° Pulses per revolution 300...5000 Admitted shaft load ≤450 N axial ≤600 N radial Voltage supply 9...30 VDC; 5 VDC ±5 % Connection 2x terminal box 3x terminal box (with option M) Interference immunity - Scan ratio 40...60 % Interference immunity EN 61000-6-2 Shaft type ø16...20 mm (blind hollow shaft) ø17 mm (cone shaft 1:10) Consumption w/o load ≤100 mA Resistance IEC 60068-2-6 Vibration 5 g, 10-2000 Hz IEC 60068-2-27 Shock 50 g, 6 ms Materials Housing: aluminium die-cast Shaft: stainless steel Protection DIN EN 60529 IP 66 Approval CE Minimum switching current 100 mA Operating speed ≤6000 rpm Shaft insulation 2.8 kV