HOG 10 + FSL

Operating torque typ. 6 Ncm Emitted interference EN 61000-6-3 Consumption w/o load ≤100 mA Range of switching speed (ns) 850...4500 rpm (Δn = 2 rpm/s) Output stages HTL-P (power linedriver) TTL/RS422 Phase shift 90° ±20° Speed (n) ≤1.25 · ns Switching accuracy ±4 % (Δn = 2 rpm/s); = +20 % (Δn = 1500 rpm/s) Approval CE Shaft type ø16...20 mm (blind hollow shaft) ø17 mm (cone shaft 1:10) Switching hysteresis ~40 % of switching speed Admitted shaft load ≤450 N axial ≤600 N radial Size (flange) ø105 mm manufacter SKU HOG 10 + FSL Operating temperature -40...+100 °C -25...+100 °C (>3072 pulses per revolution) -50...+100 °C (optional) Sensing method Optical Voltage supply 9...30 VDC 5 VDC ±5 % Resistance IEC 60068-2-6 Vibration 5 g, 10-2000 Hz IEC 60068-2-27 Shock 50 g, 11 ms Scan ratio 40...60 % Switching deviation cw-ccw rotation ≤3 % Protection DIN EN 60529 IP 66 Pulses per revolution 300...5000 Weight approx. 2.2 kg 2.4 kg (with option M) Connection 2x terminal box 3x terminal box (with option M) Shaft insulation 2.8 kV Interference immunity EN 61000-6-2 Transmission length ≤350 m at 100 kHz (HTL-P) ≤550 m at 100 kHz (TTL) Output frequency ≤120 kHz ≤300 kHz (on request) Reference signal Zero pulse, width 90° Output switching capacity ≤6 A / 230 VAC; ≤1 A / 125 VDC Rotor moment of inertia 400 gcm² Minimum switching current 50 mA Materials Housing: aluminium die-cast Shaft: stainless steel Switching outputs 1 output, speed control HOG 10 + FSL output signals K1, K2, K0 + inverted Error output (only EMS)