Resistance DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz DIN EN 60068-2-27 Shock 300 g, 6 ms Protection DIN EN 60529 IP 65 (without shaft seal) IP 67 (with shaft seal) Reference signal Zero pulse, width 90° ±10 % Output frequency ≤300 kHz (TTL) ≤160 kHz (HTL) Weight approx. 300 g Sensing method Optical Operating speed ≤6000 rpm (+20 °C, IP 67) ≤12000 rpm (+20 °C, IP 65) Short-circuit proof
Output frequency ≤300 kHz (TTL) ≤160 kHz (HTL) Reverse polarity protection Yes manufacter SKU EIL580P-SC - clamping flange Sensing method Optical Admitted shaft load ≤40 N axial ≤80 N radial Reference signal Zero pulse 90° or 180° Starting torque ≤0.015 Nm (+20 °C, IP 65) ≤0.02 Nm (+20 °C, IP 67) Scan ratio 45...55 % typical at 2048 ppr Weight approx. 300 g Size (flange)
Protection DIN EN 60529 IP 65 (without shaft seal) IP 67 (with shaft seal) Scan ratio 45...55 % typical at 2048 ppr Reference signal Zero pulse 90° or 180° Operating temperature -40...+100 °C Voltage supply 4.75...30 VDC Approval UL 508 / CSA 22.2 Admitted shaft load ≤40 N axial ≤80 N radial Emitted interference DIN EN 61000-6-3 Output frequency ≤300 kHz (TTL) ≤160 kHz (HTL) Int
manufacter SKU EIL580P-T - through hollow shaft Starting torque ≤0.02 Nm (+20 °C, IP 65) ≤0.025 Nm (+20 °C, IP 67) Sensing method Optical Materials Housing: aluminium die-cast Flange: aluminium Shaft type ø8...15 mm (through hollow shaft) Consumption w/o load ≤70 mA Programmable parameters Output level TTL/HTL Pulse number 1...65536 Zero pulse width 90°/180° Zero pulse position Signal seque
Materials Housing: aluminium die-cast Flange: aluminium Weight approx. 300 g Reference signal Zero pulse, width 90° ±10 % Protection DIN EN 60529 IP 65 Approval UL 508 / CSA 22.2 Interference immunity DIN EN 61000-6-2 Shaft type ø8...15 mm (blind hollow shaft) Scan ratio 40...60 % Reverse polarity protection Yes Motor shaft tolerance 0.2 mm axial 0.03 mm radial Resistance DIN
Resistance DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz DIN EN 60068-2-27 Shock 300 g, 6 ms Sensing method Optical Size (flange) ø58 mm Connection Flange connector M12, 8-pin Flange connector M23, 12-pin Cable Emitted interference DIN EN 61000-6-3 Phase shift 90° ±10° Scan ratio 40...60 % Shaft type ø10 x 20 mm, solid shaft with flat (clamping flange) Operating speed ≤12000 rp
Protection DIN EN 60529 IP 66 Approvals CE UL approval / E256710 Output frequency ≤120 kHz ≤300 kHz (on request) Admitted shaft load ≤200 N axial ≤300 N radial Reference signal Zero pulse, width 90° Weight approx. 700 g Interference immunity EN 61000-6-2 FOG 9 output signals K1, K2, K0 + inverted Error output (only EMS) Emitted interference EN 61000-6-3 Rotor moment of inertia 1
Rotor moment of inertia 160 gcm² Open-circuit voltage 10...30 mV per rpm Armature-circuit time-constant Calibration tolerance ±5 % Operating speed ≤10000 rpm Isolation class B Reversal tolerance ≤0.1 % Weight approx. 1.3 kg Consumption w/o load ≤100 mA Emitted interference EN 61000-6-3 Scan ratio 40...60 % Operating temperature -30...+100 °C -25...+100 °C (>3072
Scan ratio 40...60 % Flange EURO flange B10 Admitted shaft load ≤200 N axial ≤300 N radial Linearity tolerance ≤0.15 % Rotor moment of inertia 160 gcm² Reference signal Zero pulse, width 90° Resistance IEC 60068-2-6 Vibration 10 g, 10-2000 Hz IEC 60068-2-27 Shock 100 g, 6 ms Isolation class B Shaft type ø11 mm solid shaft manufacter SKU FOG 9 + GT 7.16 Materials H
Protection DIN EN 60529 IP 54 (without shaft seal) IP 65 (with shaft seal) Operating speed ≤10000 rpm Reference signal Zero pulse, width 90° Approval UL approval / E63076 Emitted interference DIN EN 61000-6-4 Sensing method Optical Interference immunity DIN EN 61000-6-2 Weight approx. 250 g Starting torque ≤0.015 Nm (IP 54) ≤0.03 Nm (IP 65) Rotor moment of inertia 20 gcm²
Rotor moment of inertia 20 gcm² Interference immunity DIN EN 61000-6-2 Output stages Linedriver/RS422 Push-pull short-circuit proof Admitted shaft load ≤20 N axial ≤40 N radial Reference signal Zero pulse, width 90° Protection DIN EN 60529 IP 54 (without shaft seal) IP 65 (with shaft seal) Voltage supply 5 VDC ±10 % 4.75...30 VDC 10...30 VDC manufacter SKU G0356 Approval UL approval / E
Rotor moment of inertia 2000 gcm² Connection Connector M23, 12-pin Reference signal Zero pulse, width 90° Operating temperature -25...+85 °C (24 VDC) -40...+85 °C (optional) Size (flange) ø75 mm Operating speed ≤3800 rpm manufacter SKU G1I0S Weight approx. 700 g Shaft type ø20 mm (blind hollow shaft) ø25 mm (blind hollow shaft) Materials Housing: aluminium Flang
Operating temperature -25...+85 °C Consumption w/o load ≤30 mA (24 VDC) ≤60 mA (5 VDC) Output stages Linedriver/RS422 Push-pull short-circuit proof GE355 output signals A 90° B, N + inverted Connection Cable 1 m Cable 1.5 m Flange Clamping flange manufacter SKU GE355 Admitted shaft load ≤20 N axial ≤40 N radial Emitted interference DIN EN 61000-6-4 Protection DIN EN 60529 IP 67
Shaft type ø12 mm (through hollow shaft) Size (flange) ø58 mm Weight approx. 250 g Relative humidity 95 % non-condensing Voltage supply 5 VDC ±10 % 4.75...30 VDC 10...30 VDC Protection DIN EN 60529 IP 54 IP 65 Rotor moment of inertia 14.5 gcm² Output stages Linedriver/RS422 Push-pull short-circuit proof Connection Connector M23, 12-pin Cable 1 m Reference signal Zero puls
GI331.0704141 Incremental encoder with hollow shaft, ø12 mm, optical sensing, mounting by thread pin or clamping ring, cost-efficient mounting. The main characteristics of GI331.0704141: Housing: ø58 mm; Shaft: ø12 mm hollow shaft; Hollow shaft ø12 mm with 2 thread pins with pin 15 mm, IP 54; Voltage supply / signals: 70 4.75...30 VDC / push-pull; E-connection: Cable 1 m, radial; Pulses per rev
