G25

manufacter SKU G25 Bearing life 1.6 x 10 10 rev. at 10 % of rated shaft loading (8 lbs axial/radial) Starting torque ≤0.015 Nm (IP 54) ≤0.03 Nm (IP 67) Emitted interference DIN EN 61000-6-4 Protection DIN EN 60529 IP 54 (without shaft seal) IP 67 (with shaft seal) Rotor moment of inertia 14.5 gcm² Sensing method Optical Connection MIL-connector, 7-pin MIL-connector, 10-pin Cable 1 m Consumption w/o load ≤30 mA (24 VDC) ≤60 mA (5 VDC) Output stages Linedriver/RS422 Push-pull short-circuit proof Weight approx. 12.5 oz. 350 g Voltage supply 5 VDC ±10 % 4.75...30 VDC Flange Clamping flange square 2.5" x 2.5" (63.5 x 63.5 mm) Reverse polarity protection Yes (4.75...30 VDC) Interference immunity DIN EN 61000-6-2 Shaft type ø0.375" (ø9.52 mm) solid shaft Materials Housing: aluminium Flange: aluminium Output frequency ≤150 kHz Admitted shaft load ≤80 lbs (350 N) axial/radial ≤100 lbs (450 N) axial or ≤150 lbs (670 N) radial Pulses per revolution 5...6000 Relative humidity 95 % non-condensing Size (flange) 2.5 x 2.5" (63.5 x 63.5 mm) G25 output signals A, B, Z A, B, Z + inverted Operating speed ≤10000 rpm (IP 54) ≤6000 rpm (IP 67) Operating temperature -30...+100 °C (5 VDC) -30...+85 °C (24 VDC) Resistance DIN EN 60068-2-6 Vibration 10 g, 10-2000 Hz DIN EN 60068-2-27 Shock 100 g, 6 ms