GA210 - parallel

Operating speed ≤10000 rpm (mechanical) ≤6000 rpm (electric) Protection DIN EN 60529 IP 54 (without shaft seal) IP 65 (with shaft seal) Emitted interference DIN EN 61000-6-4 Approval UL approval / E63076 Size (flange) ø58 mm Output stages Push-pull short-circuit proof Relative humidity 95 % non-condensing Function Singleturn Shaft type ø10 mm solid shaft Consumption w/o load ≤60 mA (24 VDC) Operating temperature -25...+85 °C -40...+85 °C (optional) Materials Housing: aluminium Flange: aluminium Interference immunity DIN EN 61000-6-2 Absolute accuracy ±0.1 ° Resistance DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms Inputs Control signals UP/ DOWN and zero STORE ENABLE Reverse polarity protection Yes Starting torque ≤0.015 Nm (IP 54) ≤0.03 Nm (IP 65) Connection Connector M23, 16-pin Cable 1 m Interface 10 parallel outputs manufacter SKU GA210 - parallel Voltage supply 10...30 VDC Rotor moment of inertia 14.5 gcm² Flange Clamping flange Steps per turn 1024 / 10 bit Code sequence CW/CCW coded by connection Initializing time typ. 20 ms after power on Sensing method Optical Admitted shaft load ≤20 N axial ≤40 N radial Code Gray or binary Weight approx. 250 g