GA241 - parallel

Flange Synchro flange manufacter SKU GA241 - parallel Function Singleturn Initializing time typ. 20 ms after power on Approval UL approval / E63076 Interference immunity DIN EN 61000-6-2 Voltage supply 10...30 VDC Relative humidity 95 % non-condensing Resistance DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms Protection DIN EN 60529 IP 54 (without shaft seal) IP 65 (with shaft seal) Output stages Push-pull short-circuit proof Emitted interference DIN EN 61000-6-4 Admitted shaft load ≤20 N axial ≤40 N radial Inputs Control signals UP/ DOWN and zero STORE ENABLE Code sequence CW/CCW coded by connection Rotor moment of inertia 14.5 gcm² Consumption w/o load ≤60 mA (24 VDC) Starting torque ≤0.015 Nm (IP 54) ≤0.03 Nm (IP 65) Size (flange) ø58 mm Sensing method Optical Diagnostic functions Self-diagnosis Code continuity check Shaft type ø6 mm solid shaft Code Gray or binary Operating speed ≤10000 rpm (mechanical) ≤6000 rpm (electric) Materials Housing: aluminium Flange: aluminium Absolute accuracy ±0.025 ° Reverse polarity protection Yes Connection Connector M27, 21-pin Cable 1 m Weight approx. 250 g Interface 13 parallel outputs Operating temperature -25...+85 °C -40...+85 °C (optional) Steps per turn 8192 / 13 bit