ExEIL580-SC - clamping flange

Resistance DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz DIN EN 60068-2-27 Shock 300 g, 6 ms Sensing method Optical Size (flange) ø58 mm Connection Flange connector M12, 8-pin Flange connector M23, 12-pin Cable Emitted interference DIN EN 61000-6-3 Phase shift 90° ±10° Scan ratio 40...60 % Shaft type ø10 x 20 mm, solid shaft with flat (clamping flange) Operating speed ≤12000 rpm (+20 °C) ≤11000 rpm (+40 °C) ≤8000 rpm (+60 °C) ExEIL580-SC - clamping flange output signals A+, B+, R+, A-, B-, R- Consumption w/o load ≤70 mA manufacter SKU ExEIL580-SC - clamping flange Output frequency ≤300 kHz (TTL) ≤160 kHz (HTL) Pulses per revolution 100...5000 Starting torque ≤0.015 Nm (+20 °C) Admitted shaft load ≤40 N axial ≤80 N radial Protection DIN EN 60529 IP 65 Explosion protection II 3 D Ex tc IIIC T135°C Dc X (dust): Special conditions "X" on page 11 Short-circuit proof Yes (HTL) Yes (TTL, max. 1 s and 1 signal) Weight approx. 300 g Ambient temperature -20...+60 °C Interference immunity DIN EN 61000-6-2 Approval UL 508 / CSA 22.2 Reference signal Zero pulse, width 90° ±10 % Relative humidity 90 % non-condensing Voltage supply 5 VDC ±5 % 8...30 VDC 4.75...30 VDC Reverse polarity protection Yes Materials Housing: aluminium die-cast Flange: aluminium Solid shaft: stainless steel Output stages TTL/RS422 HTL/push-pull