EIL580P-T - through hollow shaft

manufacter SKU EIL580P-T - through hollow shaft Starting torque ≤0.02 Nm (+20 °C, IP 65) ≤0.025 Nm (+20 °C, IP 67) Sensing method Optical Materials Housing: aluminium die-cast Flange: aluminium Shaft type ø8...15 mm (through hollow shaft) Consumption w/o load ≤70 mA Programmable parameters Output level TTL/HTL Pulse number 1...65536 Zero pulse width 90°/180° Zero pulse position Signal sequence Relative humidity 90 % non-condensing Emitted interference DIN EN 61000-6-3 Short-circuit proof Yes Reverse polarity protection Yes Size (flange) ø58 mm Interference immunity DIN EN 61000-6-2 Initializing time ≤30 ms after power on Voltage supply 4.75...30 VDC Reference signal Zero pulse 90° or 180° EIL580P-T - through hollow shaft output signals A+, B+, R+, A-, B-, R- Weight approx. 300 g Protection DIN EN 60529 IP 65 (without shaft seal) IP 67 (with shaft seal) Scan ratio 45...55 % typical at 2048 ppr Approval UL 508 / CSA 22.2 Operating speed ≤3000 rpm (+20 °C, IP 67) ≤6000 rpm (+20 °C, IP 65) Operating temperature -40...+100 °C Output frequency ≤300 kHz (TTL) ≤160 kHz (HTL) Resistance DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz DIN EN 60068-2-27 Shock 250 g, 6 ms Output stages TTL/RS422 HTL/push-pull Pulses per revolution 1...65536 Motor shaft tolerance 0.2 mm axial 0.03 mm radial Connection Flange connector M12, 8-pin Flange connector M23, 12-pin Cable