EIL580P-B - blind hollow shaft

Protection DIN EN 60529 IP 65 (without shaft seal) IP 67 (with shaft seal) Connection Flange connector M12, 8-pin Flange connector M23, 12-pin Cable Output stages TTL/RS422 HTL/push-pull Motor shaft tolerance 0.2 mm axial 0.03 mm radial manufacter SKU EIL580P-B - blind hollow shaft Output frequency ≤300 kHz (TTL) ≤160 kHz (HTL) Pulses per revolution 1...65536 Interference immunity DIN EN 61000-6-2 Relative humidity 90 % non-condensing Scan ratio 45...55 % typical at 2048 ppr Size (flange) ø58 mm Shaft type ø8...15 mm (blind hollow shaft) Starting torque ≤0.02 Nm (+20 °C, IP 65) ≤0.025 Nm (+20 °C, IP 67) Operating speed ≤6000 rpm (+20 °C, IP 67) ≤8000 rpm (+20 °C, IP 65) Programmable parameters Output level TTL/HTL Pulse number 1...65536 Zero pulse width 90°/180° Zero pulse position Signal sequence Approval UL 508 / CSA 22.2 Consumption w/o load ≤70 mA Reference signal Zero pulse 90° or 180° Short-circuit proof Yes Operating temperature -40...+100 °C Initializing time ≤30 ms after power on Emitted interference DIN EN 61000-6-3 Materials Housing: aluminium die-cast Flange: aluminium Voltage supply 4.75...30 VDC Weight approx. 300 g Reverse polarity protection Yes EIL580P-B - blind hollow shaft output signals A+, B+, R+, A-, B-, R- Sensing method Optical Resistance DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz DIN EN 60068-2-27 Shock 250 g, 6 ms