EIL580P-SQ10 - Square flange

Protection DIN EN 60529 IP 65 (without shaft seal) IP 67 (with shaft seal) Scan ratio 45...55 % typical at 2048 ppr Reference signal Zero pulse 90° or 180° Operating temperature -40...+100 °C Voltage supply 4.75...30 VDC Approval UL 508 / CSA 22.2 Admitted shaft load ≤40 N axial ≤80 N radial Emitted interference DIN EN 61000-6-3 Output frequency ≤300 kHz (TTL) ≤160 kHz (HTL) Interference immunity DIN EN 61000-6-2 Short-circuit proof Yes Connection Flange connector M12, 8-pin Flange connector M23, 12-pin Cable Output stages TTL/RS422 HTL/push-pull Consumption w/o load ≤70 mA Materials Housing: aluminium die-cast Flange: aluminium Solid shaft: stainless steel EIL580P-SQ10 - Square flange output signals A+, B+, R+, A-, B-, R- Size (flange) 63.5 x 63.5 mm Operating speed ≤6000 rpm (+20 °C, IP 67) ≤12000 rpm (+20 °C, IP 65) Starting torque ≤0.015 Nm (+20 °C, IP 65) ≤0.02 Nm (+20 °C, IP 67) Sensing method Optical Weight approx. 370 g Pulses per revolution 1...65536 Relative humidity 90 % non-condensing manufacter SKU EIL580P-SQ10 - Square flange Reverse polarity protection Yes Programmable parameters Output level TTL/HTL Pulse number 1...65536 Zero pulse width 90°/180° Zero pulse position Signal sequence Flange Clamping flange square 63.5 x 63.5 mm Shaft type ø10 x 20 mm, solid shaft with flat ø9.525 mm (3/8") x 20 mm, solid shaft with flat Initializing time ≤30 ms after power on Resistance DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz DIN EN 60068-2-27 Shock 300 g, 6 ms