GE355

Operating temperature -25...+85 °C Consumption w/o load ≤30 mA (24 VDC) ≤60 mA (5 VDC) Output stages Linedriver/RS422 Push-pull short-circuit proof GE355 output signals A 90° B, N + inverted Connection Cable 1 m Cable 1.5 m Flange Clamping flange manufacter SKU GE355 Admitted shaft load ≤20 N axial ≤40 N radial Emitted interference DIN EN 61000-6-4 Protection DIN EN 60529 IP 67 Interference immunity DIN EN 61000-6-2 Materials Housing: stainless steel 1.4305 Flange: stainless steel 1.4305 Weight approx. 500 g Size (flange) ø58 mm Voltage supply 5 VDC ±10 % 4.75...30 VDC 10...30 VDC Output frequency ≤150 kHz Operating speed ≤10000 rpm Resistance DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms Pulses per revolution 5...6000 Starting torque ≤0.03 Nm (IP 67) Reference signal Zero pulse, width 90° Shaft type ø10 mm solid shaft (clamping flange) Rotor moment of inertia 14.5 gcm² Relative humidity 95 % non-condensing Reverse polarity protection Yes (4.75...30 VDC) Sensing method Optical Approval UL approval / E63076