GE244

Flange Clamping flange Weight approx. 600 g Interference immunity DIN EN 61000-6-2 Connection Connector M23, 12-pin Code Gray or binary Function Singleturn Output stages SSI data: linedriver RS485 Diagnostic outputs push-pull Incremental: push-pull or linedriver RS422 Resistance DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms Incremental output 2048 pulses A90°B + inverted Emitted interference DIN EN 61000-6-4 Sensing method Optical Steps per turn ≤16384 / 14 bit Interfaces SSI Incremental A 90° B (optional) Initializing time typ. 20 ms after power on Admitted shaft load ≤20 N axial ≤40 N radial Inputs SSI clock Control signals UP/ DOWN and zero Materials Housing: stainless steel 1.4305 or 1.4404 Flange: stainless steel 1.4305 or 1.4404 Code sequence CW/CCW coded by connection Rotor moment of inertia 14.5 gcm² Operating temperature -25...+85 °C -40...+85 °C (optional) Operating speed ≤10000 rpm (mechanical) ≤6000 rpm (electric) Diagnostic function Self-diagnosis Relative humidity 95 % non-condensing Shaft type ø10 mm solid shaft Approval UL approval / E63076 Size (flange) ø58 mm manufacter SKU GE244 Starting torque ≤0.03 Nm Voltage supply 10...30 VDC Consumption w/o load ≤50 mA (24 VDC) Reverse polarity protection Yes Absolute accuracy ±0.025 ° Protection DIN EN 60529 IP 67