FOG 9 + GT 7.08

Rotor moment of inertia 160 gcm² Open-circuit voltage 10...30 mV per rpm Armature-circuit time-constant Calibration tolerance ±5 % Operating speed ≤10000 rpm Isolation class B Reversal tolerance ≤0.1 % Weight approx. 1.3 kg Consumption w/o load ≤100 mA Emitted interference EN 61000-6-3 Scan ratio 40...60 % Operating temperature -30...+100 °C -25...+100 °C (>3072 pulses per revolution) Output frequency ≤120 kHz ≤300 kHz (on request) Admitted shaft load ≤200 N axial ≤300 N radial Performance 0.3 W (speed ≥5000 rpm) Materials Housing: aluminium die-cast Shaft: stainless steel Interference immunity EN 61000-6-2 Linearity tolerance ≤0.15 % FOG 9 + GT 7.08 output signals K1, K2, K0 + inverted Error output (only EMS) Temperature coefficient ±0.05 %/K (open-circuit) manufacter SKU FOG 9 + GT 7.08 Pulses per revolution 100...5000 Phase shift 90° ±20° Connection Flange connector M23, 12-pin Screw terminal connector Connecting cable (option) Resistance IEC 60068-2-6 Vibration 10 g, 10-2000 Hz IEC 60068-2-27 Shock 100 g, 6 ms Approval CE Climatic test Humid heat, constant (IEC 60068-2-3, Ca) Reference signal Zero pulse, width 90° Protection DIN EN 60529 IP 55 Flange EURO flange B10 Shaft type ø11 mm solid shaft Voltage supply 9...30 VDC; 5 VDC ±5 % Output stages HTL; TTL/RS422 Size (flange) ø115 mm Operating torque typ. 6 Ncm