EIL580-SC - clamping flange

Operating temperature -40...+85 °C Output frequency ≤300 kHz (TTL) ≤160 kHz (HTL) Sensing method Optical Relative humidity 90 % non-condensing Pulses per revolution 100...5000 Admitted shaft load ≤40 N axial ≤80 N radial manufacter SKU EIL580-SC - clamping flange Connection Flange connector M12, 8-pin Flange connector M23, 12-pin Cable Emitted interference DIN EN 61000-6-3 Output stages TTL/RS422 HTL/push-pull Reference signal Zero pulse, width 90° ±10 % Scan ratio 40...60 % Size (flange) ø58 mm Phase shift 90° ±10° Approval UL 508 / CSA 22.2 Interference immunity DIN EN 61000-6-2 EIL580-SC - clamping flange output signals A+, B+, R+, A-, B-, R- Resistance DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz DIN EN 60068-2-27 Shock 300 g, 6 ms Starting torque ≤0.015 Nm (+20 °C, IP 65) ≤0.02 Nm (+20 °C, IP 67) Operating speed ≤6000 rpm (+20 °C, IP 67) ≤12000 rpm (+20 °C, IP 65) Weight approx. 300 g Shaft type ø10 x 20 mm, solid shaft with flat (clamping flange) ø9.525 mm (3/8") x 20 mm, solid shaft with flat Materials Housing: aluminium die-cast Flange: aluminium Solid shaft: stainless steel Protection DIN EN 60529 IP 65 (without shaft seal) IP 67 (with shaft seal) Reverse polarity protection Yes Short-circuit proof Yes (HTL) Yes (TTL, max. 1 s and 1 signal) Voltage supply 5 VDC ±5 % 8...30 VDC 4.75...30 VDC Consumption w/o load ≤70 mA