Specification: Part Number 1057099 Dielectricity constant: ≥ 1.8 with coaxial tube, ≥ 5 for mono rod probe / rope probe Output current: < 100 mA Upper signal level: 20 mA ... 20.5 mA Process temperature: -20 °C ... +100 °C Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 350 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 15 V Temperature drift: < 0.1 mm/K CULus certificate: +
Specification: Part Number 1062271 Design: Standard Dielectricity constant: ≥ 1.8 with coaxial tube, ≥ 5 for mono rod probe / rope probe Lower signal level: 3.8 mA ... 4 mA Response time: < 400 ms CULus certificate: + Power consumption: ≤ 100 mA at 24 V DC without output load Capacitive load: 100 nF Probe type: Mono rod probe Ambient storage temperature: -40 °C ... +80 °C Process temperature
Specification: Part Number 1056292 Conductivity: No limitation Max.probe load: 6 Nm Probe length: 900 mm Signal voltage LOW: ≤ 2 V Interference resistance: EN 61000-6-2:2005 EMC: EN 61326-1:2006, 2004/108/EG Power consumption: ≤ 75 mA at 24 V DC without output load Response time: < 400 ms Inactive area at process connector: 25 mm Upper signal level: 20 mA ... 20.5 mA Signal voltage HIGH: V
Specification: Part Number 1071079 Upper signal level: 20 mA ... 20.5 mA Max.probe load: 6 Nm Signal voltage HIGH: Vs - 2 V Process connection: G ¾ A Length coaxial cable: 1 m, PVC Ambient storage temperature: -40 °C ... +80 °C Probe type: Mono rod probe Output current: < 100 mA Hysteresis: Min. 2 mm, free adjustable Repeatability: ≤ 2 mm Process pressure: -1 bar ... 10 bar Probe length:
Specification: Part Number 1071082 Housing material: Plastic PBT GOST approval: + Measurement: Switch, Continuous Accuracy of sensor element: ± 5 mm Signal voltage HIGH: Vs - 2 V CULus certificate: + Conductivity: No limitation Ambient temperature operation: -20 °C ... +60 °C Maximum level change: 500 mm/s Probe length: 1,000 mm Hysteresis: Min. 2 mm, free adjustable Process temperature: -2
Specification: Part Number 1071089 Maximum level change: 500 mm/s Upper signal level: 20 mA ... 20.5 mA Enclosure rating: IP 67: EN 60529 Output current: < 100 mA Output signal: 1 PNP transistor output (Q1) und 3 PNP / NPN transistor output (Q2...Q4) switchable, 4 mA ... 20 mA, 0 V ... 10 V automatic switching depending on the load. Signal voltage LOW: ≤ 2 V Housing material: Plastic PBT Probe length: 1,00
Specification: Part Number 1071099 Connection type: Round connector M12 x 1, 5-pin Housing material: Plastic PBT Supply voltage: 12 V DC ... 30 V DC Max.probe load: 6 Nm Length coaxial cable: 1 m, PVC Response time: < 400 ms Signal voltage HIGH: Vs - 2 V Output signal: 1 PNP transistor output (Q1) and 1 PNP / NPN transistor output (Q2) switchable, 4 mA ... 20 mA, 0 V ... 10 V automatic switching depending on
Specification: Part Number 1071102 Wetted parts: 1.4404, PTFE RoHS certificate: + Signal voltage LOW: ≤ 2 V Supply voltage: 12 V DC ... 30 V DC Connection type: Round connector M12 x 1, 5-pin Hysteresis: Min. 2 mm, free adjustable IO-Link: + Process temperature: -20 °C ... +100 °C Dielectricity constant: ≥ 1.8 with coaxial tube, ≥ 5 for mono rod probe / rope probe Process pressure: -1 bar .
Specification: Part Number 1057100 Process pressure: -1 bar ... 10 bar Output current: < 100 mA Dielectricity constant: ≥ 1.8 with coaxial tube, ≥ 5 for mono rod probe / rope probe Resolution: < 2 mm EMC: EN 61326-1:2006, 2004/108/EG GOST approval: + Ambient storage temperature: -40 °C ... +80 °C Accuracy of sensor element: ± 5 mm Power consumption: ≤ 100 mA at 24 V DC without output load
Specification: Part Number 1071109 GOST approval: + Temperature drift: < 0.1 mm/K Signal voltage HIGH: Vs - 2 V Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 350 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 15 V Output current: < 100 mA MTTF: 194.3 a (EN ISO 13849-1) Hysteresis: Min. 2 mm, free adjustable Process temperature: -20 °C ... +100 °C Probe length: 1,000 mm M
Specification: Part Number 1071112 Signal voltage LOW: ≤ 2 V Inactive area at process connector: 25 mm Measurement: Switch, Continuous Housing material: Plastic PBT Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 350 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 15 V Accuracy of sensor element: ± 5 mm Protection class: III Length coaxial cable: 2 m, PVC Maximum level change
Specification: Part Number 1071117 Signal voltage HIGH: Vs - 2 V Upper signal level: 20 mA ... 20.5 mA Conductivity: No limitation Housing material: Plastic PBT Inductive load: < 1 H Ambient temperature operation: -20 °C ... +60 °C Maximum level change: 500 mm/s Initialization time: ≤ 5 s CULus certificate: + Accuracy of sensor element: ± 5 mm Hysteresis: Min. 2 mm, free adjustable Inact
Specification: Part Number 1062272 Medium: Fluids Protection class: III Initialization time: ≤ 5 s Temperature drift: < 0.1 mm/K Inactive area at probe end: 10 mm Conductivity: No limitation Maximum level change: 500 mm/s Process connection: ¾" NPT MTTF: 194.3 a (EN ISO 13849-1) Design: Standard Process temperature: -20 °C ... +100 °C Output signal: 1 PNP transistor output (Q1) und 3 PN
Specification: Part Number LFP1000-E4DMB Upper signal level: 20 mA ... 20.5 mA Connection type: Round connector M12 x 1, 5-pin Medium: Fluids Temperature drift: < 0.1 mm/K Resolution: < 2 mm Signal voltage LOW: ≤ 2 V MTTF: 194.3 a (EN ISO 13849-1) Process connection: G ¾ A Initialization time: ≤ 5 s Measurement: Switch, Continuous Process pressure: -1 bar ... 10 bar Dielectricity consta
Specification: Part Number 1066785 Capacitive load: 100 nF Housing material: Plastic PBT Output current: < 100 mA Maximum level change: 500 mm/s Resolution: < 2 mm Initialization time: ≤ 5 s GOST approval: + Inactive area at process connector: 25 mm Probe length: 1,000 mm Temperature drift: < 0.1 mm/K Conductivity: No limitation Process connection: G ¾ A Protection class: III Rep
Specification: Part Number 1066792 EMC: EN 61326-1:2006, 2004/108/EG Enclosure rating: IP 67: EN 60529 Initialization time: ≤ 5 s MTTF: 194.3 a (EN ISO 13849-1) Resolution: < 2 mm IO-Link: + Maximum level change: 500 mm/s Probe type: Rope probe Accuracy of sensor element: ± 5 mm Connection type: Round connector M12 x 1, 5-pin Conductivity: No limitation Inactive area at probe end: 10 mm
Specification: Part Number 1071119 Ambient storage temperature: -40 °C ... +80 °C Interference resistance: EN 61000-6-2:2005 GOST approval: + Accuracy of sensor element: ± 5 mm Interference emission: EN 61000-6-4:2007 Housing material: 303 Temperature drift: < 0.1 mm/K Housing design: With PMMA viewing window Capacitive load: 100 nF Inactive area at process connector: 25 mm Process temperature:
Specification: Part Number 1071127 Enclosure rating: IP 67: EN 60529, IP 69K: EN 40050 Temperature drift: < 0.1 mm/K Capacitive load: 100 nF Inactive area at process connector: 25 mm UL approval: + Max.probe load: 6 Nm Single- and continuous shock: EN 60068-2-27 Interference resistance: EN 61000-6-2:2005 Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 400 Ohm at Uv > 12 V, 4 mA ...
Specification: Part Number 1071128 Connection type: Round connector M12 x 1, 5-pin Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK Ambient storage temperature: -40 °C ... +80 °C Probe length: 1,000 mm Single- and continuous shock: EN 60068-2-27 Lower signal level: 3.8 mA ... 4 mA RoHS certificate: + EHEDG approval: + Interference resistance: EN 61000-6-2:2005 EMC: EN 61326-1:2006, 2004/108/EG GOST app
Specification: Part Number 1071130 Enclosure rating: IP 67: EN 60529, IP 69K: EN 40050 Hysteresis: Min. 2 mm, free adjustable Measurement: Switch, Continuous Output current: < 100 mA Process pressure: -1 bar ... 16 bar Lower signal level: 3.8 mA ... 4 mA Initialization time: ≤ 2 s Conductivity: No limitation Connection type: Round connector M12 x 1, 5-pin Process connection: G ¾ A Housing desig
Specification: Part Number 1071132 Protection class: III Dielectricity constant: ≥ 1.8 with coaxial tube, ≥ 5 for mono probe Output current: < 100 mA EMC: EN 61326-1:2006, 2004/108/EG Upper signal level: 20 mA ... 20.5 mA Capacitive load: 100 nF Measurement: Switch, Continuous Ambient storage temperature: -40 °C ... +80 °C Inactive area at process connector: 25 mm Conductivity: No limitation
Specification: Part Number 1056204 GOST approval: + EHEDG approval: + Response time: < 400 ms Housing material: 303 Conductivity: No limitation Inactive area at probe end: 10 mm Process connection: G ¾ A RoHS certificate: + Temperature drift: < 0.1 mm/K Single- and continuous shock: EN 60068-2-27 Medium: Fluids Enclosure rating: IP 67: EN 60529, IP 69K: EN 40050 Interference emission:
Specification: Part Number 1071134 Resolution: < 2 mm Max.probe load: 6 Nm Interference emission: EN 61000-6-4:2007 EMC: EN 61326-1:2006, 2004/108/EG GOST approval: + Response time: < 400 ms Medium: Fluids Single- and continuous shock: EN 60068-2-27 Signal voltage LOW: ≤ 2 V RoHS certificate: + Signal voltage HIGH: Vs - 2 V Ambient temperature operation: -20 °C ... +60 °C Conductivit
Specification: Part Number 1071137 Signal voltage HIGH: Vs - 2 V 3-A: - Single- and continuous shock: EN 60068-2-27 Ambient temperature coaxial cable: -20 °C ... +60 °C Max.probe load: 6 Nm Capacitive load: 100 nF EHEDG approval: + Interference resistance: EN 61000-6-2:2005 Inactive area at probe end: 10 mm GOST approval: + Protection class: III Length coaxial cable: 2 m, FEP Process temp
Specification: Part Number 1071142 Process pressure: -1 bar ... 16 bar Output current: < 100 mA Initialization time: ≤ 2 s 3-A: - Housing material: 303 Interference emission: EN 61000-6-4:2007 EHEDG approval: + Process temperature: -20 °C ... +180 °C Dielectricity constant: ≥ 1.8 with coaxial tube, ≥ 5 for mono probe Temperature drift: < 0.1 mm/K Ambient temperature coaxial cable: -20
Specification: Part Number 1055623 Inactive area at probe end: 10 mm Probe length: 1,000 mm Hysteresis: Min. 2 mm, free adjustable EHEDG approval: + Process connection: ¾" NPT Interference resistance: EN 61000-6-2:2005 Medium: Fluids Capacitive load: 100 nF Initialization time: ≤ 2 s Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 400 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500
Specification: Part Number 1071143 Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 400 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 13,5 V IO-Link: + Enclosure rating: IP 67: EN 60529, IP 69K: EN 40050 Measurement: Switch, Continuous Inactive area at probe end: 10 mm 3-A: - Hysteresis: Min. 2 mm, free adjustable Process pressure: -1 bar ... 16 bar Interference emission: EN 6
Specification: Part Number 1071147 Single- and continuous shock: EN 60068-2-27 Output current: < 100 mA Probe length: 1,000 mm Repeatability: ≤ 2 mm Ambient temperature coaxial cable: -20 °C ... +60 °C Inductive load: < 1 H Resolution: < 2 mm Conductivity: No limitation Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 400 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 13
Specification: Part Number 1057101 Process temperature: -20 °C ... +100 °C Response time: < 400 ms Temperature drift: < 0.1 mm/K Supply voltage: 12 V DC ... 30 V DC Wetted parts: 1.4404, PTFE Max.probe load: 6 Nm Inactive area at probe end: 10 mm Capacitive load: 100 nF Ambient temperature operation: -20 °C ... +60 °C Power consumption: ≤ 100 mA at 24 V DC without output load Process conn
Specification: Part Number 1062273 Temperature drift: < 0.1 mm/K Enclosure rating: IP 67: EN 60529 Lower signal level: 3.8 mA ... 4 mA EMC: EN 61326-1:2006, 2004/108/EG CULus certificate: + Signal voltage LOW: ≤ 2 V Capacitive load: 100 nF Process connection: ¾" NPT Initialization time: ≤ 5 s Housing material: Plastic PBT Inactive area at probe end: 10 mm Probe type: Mono rod probe
