LFP1000-N2BMB

Specification: Part Number 1071143 Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 400 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 13,5 V IO-Link: + Enclosure rating: IP 67: EN 60529, IP 69K: EN 40050 Measurement: Switch, Continuous Inactive area at probe end: 10 mm 3-A: - Hysteresis: Min. 2 mm, free adjustable Process pressure: -1 bar ... 16 bar Interference emission: EN 61000-6-4:2007 Lower signal level: 3.8 mA ... 4 mA Repeatability: &le; 2 mm Single- and continuous shock: EN 60068-2-27 Interference resistance: EN 61000-6-2:2005 Ambient storage temperature: -40 °C ... +80 °C EHEDG approval: + EMC: EN 61326-1:2006, 2004/108/EG Wetted parts: 316L (Ra &le; 0,8 µm), PEEK Initialization time: &le; 2 s Accuracy of sensor element: ± 5 mm Housing material: 303 UL approval: + Signal voltage LOW: &le; 2 V Process connection: ¾" NPT Upper signal level: 20 mA ... 20.5 mA Dielectricity constant: &ge; 1.8 with coaxial tube, &ge; 5 for mono probe MTTF: 194.3 a (EN ISO 13849-1) Protection class: III Supply voltage: 12 V DC ... 30 V DC Ambient temperature coaxial cable: -20 °C ... +60 °C Connection type: Round connector M12 x 1, 5-pin Output current: < 100 mA Conductivity: No limitation Capacitive load: 100 nF Resolution: < 2 mm Ambient temperature operation: -20 °C ... +60 °C Length coaxial cable: 1 m, FEP Power consumption: &le; 75 mA at 24 V DC without output load Inductive load: < 1 H GOST approval: + Medium: Fluids Housing design: With closed cover Max.probe load: 6 Nm Process temperature: -20 °C ... +180 °C Inactive area at process connector: 25 mm Signal voltage HIGH: Vs - 2 V Response time: < 400 ms Temperature drift: < 0.1 mm/K RoHS certificate: +