LFP1000-G2DMB

Specification: Part Number 1071132 Protection class: III Dielectricity constant: &ge; 1.8 with coaxial tube, &ge; 5 for mono probe Output current: < 100 mA EMC: EN 61326-1:2006, 2004/108/EG Upper signal level: 20 mA ... 20.5 mA Capacitive load: 100 nF Measurement: Switch, Continuous Ambient storage temperature: -40 °C ... +80 °C Inactive area at process connector: 25 mm Conductivity: No limitation Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 400 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 13,5 V Housing material: 303 Length coaxial cable: 3.3 m, FEP Initialization time: &le; 2 s Inactive area at probe end: 10 mm UL approval: + Inductive load: < 1 H IO-Link: + RoHS certificate: + Resolution: < 2 mm Response time: < 400 ms Accuracy of sensor element: ± 5 mm Connection type: Round connector M12 x 1, 5-pin Ambient temperature coaxial cable: -20 °C ... +60 °C Medium: Fluids Housing design: With closed cover Wetted parts: 316L (Ra &le; 0,8 µm), PEEK Enclosure rating: IP 67: EN 60529, IP 69K: EN 40050 Hysteresis: Min. 2 mm, free adjustable Process pressure: -1 bar ... 16 bar Probe length: 1,000 mm GOST approval: + Process connection: G ¾ A Signal voltage LOW: &le; 2 V Temperature drift: < 0.1 mm/K Supply voltage: 12 V DC ... 30 V DC Repeatability: &le; 2 mm Interference resistance: EN 61000-6-2:2005 Process temperature: -20 °C ... +180 °C 3-A: - Lower signal level: 3.8 mA ... 4 mA Power consumption: &le; 75 mA at 24 V DC without output load Single- and continuous shock: EN 60068-2-27 Max.probe load: 6 Nm MTTF: 194.3 a (EN ISO 13849-1) Interference emission: EN 61000-6-4:2007 Signal voltage HIGH: Vs - 2 V Ambient temperature operation: -20 °C ... +60 °C EHEDG approval: +