LFP1000-G1DMB

Specification: Part Number 1071127 Enclosure rating: IP 67: EN 60529, IP 69K: EN 40050 Temperature drift: < 0.1 mm/K Capacitive load: 100 nF Inactive area at process connector: 25 mm UL approval: + Max.probe load: 6 Nm Single- and continuous shock: EN 60068-2-27 Interference resistance: EN 61000-6-2:2005 Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 400 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 13,5 V Ambient storage temperature: -40 °C ... +80 °C Wetted parts: 316L (Ra &le; 0,8 µm), PEEK Probe length: 1,000 mm Process connection: G ¾ A Process pressure: -1 bar ... 16 bar EMC: EN 61326-1:2006, 2004/108/EG Housing design: With PMMA viewing window Repeatability: &le; 2 mm Ambient temperature operation: -20 °C ... +60 °C Resolution: < 2 mm Lower signal level: 3.8 mA ... 4 mA Conductivity: No limitation Protection class: III Measurement: Switch, Continuous Inductive load: < 1 H Ambient temperature coaxial cable: -20 °C ... +60 °C 3-A: - IO-Link: + EHEDG approval: + Hysteresis: Min. 2 mm, free adjustable Connection type: Round connector M12 x 1, 5-pin Accuracy of sensor element: ± 5 mm Interference emission: EN 61000-6-4:2007 Output current: < 100 mA Signal voltage HIGH: Vs - 2 V RoHS certificate: + MTTF: 194.3 a (EN ISO 13849-1) Housing material: 303 Response time: < 400 ms Medium: Fluids GOST approval: + Length coaxial cable: 3.3 m, FEP Process temperature: -20 °C ... +180 °C Initialization time: &le; 2 s Dielectricity constant: &ge; 1.8 with coaxial tube, &ge; 5 for mono probe Power consumption: &le; 75 mA at 24 V DC without output load Signal voltage LOW: &le; 2 V Upper signal level: 20 mA ... 20.5 mA Inactive area at probe end: 10 mm Supply voltage: 12 V DC ... 30 V DC