LFP1000-B4BMB

Specification: Part Number 1071099 Connection type: Round connector M12 x 1, 5-pin Housing material: Plastic PBT Supply voltage: 12 V DC ... 30 V DC Max.probe load: 6 Nm Length coaxial cable: 1 m, PVC Response time: < 400 ms Signal voltage HIGH: Vs - 2 V Output signal: 1 PNP transistor output (Q1) and 1 PNP / NPN transistor output (Q2) switchable, 4 mA ... 20 mA, 0 V ... 10 V automatic switching depending on the load. Inactive area at probe end: 10 mm Enclosure rating: IP 67: EN 60529 Ambient temperature coaxial cable: -20 °C ... +60 °C Power consumption: &le; 100 mA at 24 V DC without output load Maximum level change: 500 mm/s RoHS certificate: + Conductivity: No limitation IO-Link: + Process pressure: -1 bar ... 10 bar Probe type: Mono rod probe Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 350 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 15 V Inductive load: < 1 H Measurement: Switch, Continuous Ambient storage temperature: -40 °C ... +80 °C Ambient temperature operation: -20 °C ... +60 °C Repeatability: &le; 2 mm Dielectricity constant: &ge; 1.8 with coaxial tube, &ge; 5 for mono rod probe / rope probe Initialization time: &le; 5 s Capacitive load: 100 nF EMC: EN 61326-1:2006, 2004/108/EG Upper signal level: 20 mA ... 20.5 mA Signal voltage LOW: &le; 2 V Hysteresis: Min. 2 mm, free adjustable Accuracy of sensor element: ± 5 mm GOST approval: + Resolution: < 2 mm Medium: Fluids MTTF: 194.3 a (EN ISO 13849-1) Lower signal level: 3.8 mA ... 4 mA CULus certificate: + Output current: < 100 mA Inactive area at process connector: 25 mm Process temperature: -20 °C ... +100 °C Probe length: 1,000 mm Design: Remote amplifier, cable length 1 m Temperature drift: < 0.1 mm/K Process connection: ¾" NPT Protection class: III Wetted parts: 1.4404, PTFE