LFP1000-B4CMB

Specification: Part Number 1071102 Wetted parts: 1.4404, PTFE RoHS certificate: + Signal voltage LOW: &le; 2 V Supply voltage: 12 V DC ... 30 V DC Connection type: Round connector M12 x 1, 5-pin Hysteresis: Min. 2 mm, free adjustable IO-Link: + Process temperature: -20 °C ... +100 °C Dielectricity constant: &ge; 1.8 with coaxial tube, &ge; 5 for mono rod probe / rope probe Process pressure: -1 bar ... 10 bar Max.probe load: 6 Nm Ambient temperature operation: -20 °C ... +60 °C Capacitive load: 100 nF Measurement: Switch, Continuous Medium: Fluids Output current: < 100 mA Response time: < 400 ms Probe length: 1,000 mm Process connection: ¾" NPT Upper signal level: 20 mA ... 20.5 mA Probe type: Mono rod probe Inactive area at probe end: 10 mm Length coaxial cable: 2 m, PVC Ambient temperature coaxial cable: -20 °C ... +60 °C Signal voltage HIGH: Vs - 2 V Maximum level change: 500 mm/s Output signal: 1 PNP transistor output (Q1) and 1 PNP / NPN transistor output (Q2) switchable, 4 mA ... 20 mA, 0 V ... 10 V automatic switching depending on the load. Accuracy of sensor element: ± 5 mm EMC: EN 61326-1:2006, 2004/108/EG Resolution: < 2 mm Lower signal level: 3.8 mA ... 4 mA Housing material: Plastic PBT Protection class: III CULus certificate: + Ambient storage temperature: -40 °C ... +80 °C MTTF: 194.3 a (EN ISO 13849-1) GOST approval: + Inductive load: < 1 H Inactive area at process connector: 25 mm Repeatability: &le; 2 mm Power consumption: &le; 100 mA at 24 V DC without output load Temperature drift: < 0.1 mm/K Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 350 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 15 V Initialization time: &le; 5 s Enclosure rating: IP 67: EN 60529 Design: Remote amplifier, cable length 2 m Conductivity: No limitation