Baumer - Encoders

Image
Part Number
Description
Admitted shaft load ≤20 N axial ≤40 N radial Inputs TxD, RxD (RS232) Control signals UP/ DOWN and zero ENABLE STORE manufacter SKU GXP1W - parallel Reverse polarity protection Yes Operating speed ≤10000 rpm (mechanical) ≤6000 rpm (electric) Shaft type ø10 mm solid shaft (clamping flange) ø6 mm solid shaft (synchro flange) Operating temperature -25...+70 °C Code Gray, cut gr
Rotor moment of inertia 20 gcm² Identifier 11 bit Approval UL approval / E63076 Resistance DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 100 g, 4 ms Transmission rate 10...1000 kBaud Operating mode Event-triggered / Time-triggered Remotely-requested Sync (cyclic) / Sync (acyclic) Number of turns ≤65536 / 16 bit Operating temperature -25...+85 °C -40...+85 °C (optional
Absolute accuracy ±0.025 ° Connection Connector M12, 5-pin Connector M23, 12-pin Connector D-SUB, 9-pin Transmission rate 10...1000 kBaud Admitted shaft load ≤20 N axial ≤40 N radial Number of turns ≤65536 / 16 bit Rotor moment of inertia 20 gcm² Status indicator DUO-LED integrated in housing Profile conformity CANopen® CiA DSP 406 V 3.0 CANopen® CiA DSP 417 Lift Starting accelerat
Transmission rate 500 kBaud Programmable parameters Total resolution Rotating direction and code Preset and offset Zero point setting Interface Interbus Output stages RS485 Rotor moment of inertia 20 gcm² Operating speed ≤6000 rpm (mechanical) ≤6000 rpm (electric) Sensing method Optical Emitted interference DIN EN 61000-6-4 manufacter SKU GXP6H - Interbus Interference immunity DIN
Number of turns ≤4096 / 12 bit Rotor moment of inertia 20 gcm² Initializing time typ. 50 ms after power on Transmission rate 500 kBaud Shaft type ø10 mm solid shaft (clamping flange) ø6 mm solid shaft (synchro flange) Output stages RS485 Sensing method Optical Consumption w/o load ≤60 mA (24 VDC) Voltage supply 10...30 VDC Absolute accuracy ±0.025 ° Code Gray
Steps per turn ≤8192 / 13 bit Starting acceleration ≤1000 U/s² Operating speed ≤10000 rpm (mechanical) ≤6000 rpm (electric) Relative humidity 95 % non-condensing Voltage supply 10...30 VDC Interface DeviceNet Rotor moment of inertia 20 gcm² Transmission rate 125...500 kBaud Function Multiturn Resistance DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Sho
Resistance IEC 60068-2-6 Vibration 10 g, 10-2000 Hz IEC 60068-2-27 Shock 100 g, 6 ms Emitted interference EN 61000-6-3 Output frequency ≤120 kHz Operating temperature -30...+100 °C Size (flange) ø158 mm Sensing method Optical manufacter SKU HG 16 Approvals CE UL approval / E256710 Radial tolerance ±0.05 mm (with zero pulse) ±0.2 mm (without zero pulse) Pulses per revolution 250.
Operating speed ≤12000 rpm Rotor moment of inertia 21.2 kgcm² Connection Terminal box (2x with option M) Flange connector M23, 12-pin (2x with option M) manufacter SKU HG 18 Materials Housing: aluminium Shaft: stainless steel Output stages HTL TTL/RS422 Resistance IEC 60068-2-6 Vibration 10 g, 10-2000 Hz IEC 60068-2-27 Shock 100 g, 6 ms Sensing method Optical Voltage supply 9...26 VDC 5 VD
Materials Housing: aluminium Shaft: stainless steel Sensing method Optical manufacter SKU HG 21 Operating speed ≤12000 rpm Consumption w/o load ≤100 mA Reference signal Zero pulse, width 90° Approvals CE UL approval / E256710 Shaft type ø85...95 mm (through hollow shaft) Axial tolerance -0.5...1.5 mm (with zero pulse) -0.5...2.5 mm (without zero pulse) Output stages HTL TTL/RS422
Axial tolerance -0.5...1.5 mm (with zero pulse) -0.5...2.5 mm (without zero pulse) Weight approx. 5.8 kg Approvals CE UL approval / E256710 Resistance IEC 60068-2-6 Vibration 10 g, 10-2000 Hz IEC 60068-2-27 Shock 100 g, 6 ms Size (flange) ø210 mm Operating speed ≤12000 rpm Output frequency ≤120 kHz ≤160 kHz (Option) Sensing method Optical HG 211 output signals K1, K2, K0 + invert
Weight approx. 5.8 kg Output frequency ≤120 kHz HG 22 output signals K1, K2, K0 + inverted Connection Terminal box (2x with option M) Flange connector M23, 12-pin (2x with option M) Materials Housing: aluminium Shaft: stainless steel manufacter SKU HG 22 Approvals CE UL approval / E256710 Sensing method Optical Shaft type ø90...120 mm (through hollow shaft) Operating speed ≤12000
Rotor moment of inertia 18 gcm² Shaft type ø12...16 mm (blind hollow shaft) Operating speed ≤12000 rpm ≤30000 rpm (option) Resistance IEC 60068-2-6 Vibration 10 g, 10-2000 Hz IEC 60068-2-27 Shock 100 g, 6 ms Phase shift 90° ±20° Output frequency ≤120 kHz Scan ratio 40...60 % Weight approx. 180 g Protection DIN EN 60529 IP 55 (≤12000 U/min) IP 23 (≤30000 rpm) Int
Shaft type ø16...20 mm (blind hollow shaft) ø17 mm (cone shaft 1:10) Status indicator DUO-LED integrated in bus cover Voltage supply 9...30 VDC Inputs SSI clock (version SSI) manufacter SKU HMG 11 Profile conformity Profibus-DPV0 CANopen® CiA DSP 406 V 3.0 Device Profile Encoder V 1.0 Encoder profile PNO 3.162 Operating temperature -20...+85 °C Approvals CE UL approval / E256710 Operat
Operating torque typ. 15 Ncm Materials Housing: aluminium alloy Shaft: stainless steel Weight approx. 3.5 kg (depending on version) Admitted shaft load ≤250 N axial ≤400 N radial Additional outputs Square-wave TTL (RS422) Square-wave HTL Emitted interference EN 61000-6-3 Interference immunity EN 61000-6-2 manufacter SKU HMG 11 + ESL 90 Switching outputs 1 output, speed control Approval C
Switching delay time ≤40 ms Interference immunity EN 61000-6-2 Number of turns ≤65536 / 16 bit Consumption w/o load ≤5 mA Size (flange) ø122 mm Connection Bus cover Terminal box or flange connector M23, 12 pin (SSI/incremental) Resistance IEC 60068-2-6 Vibration 5 g, 10-2000 Hz IEC 60068-2-27 Shock 50 g, 11 ms Steps per turn 8192 / 13 bit Switching hysteresis =30 % of switching s
Emitted interference EN 61000-6-3 Device adress Rotary switch in bus cover Code Gray (version SSI) Function Multiturn Initializing time ≤200 ms after power on Size (flange) ø122 mm Range of switching speed (ns) 850...2800 rpm (Δn = 2 rpm/s) Diagnostic function Position or parameter error Profile conformity Profibus-DPV0 CANopen® CiA DSP 406 V 3.0 Device Profile Encoder V 1.0
Rotor moment of inertia 28.5 kgcm² (ø50) Programmable parameters Depending on the selected absolute interface Transmission rate 9.6...12000 kBaud (Profibus) 10...1000 kBaud (CANopen®) 125...500 kBaud (DeviceNet) Code sequence CW default Diagnostic function Position or parameter error Steps per turn 8192 / 13 bit Consumption w/o load ≤100 mA (per interface SSI) ≤250 mA (per interface bus)
Rotor moment of inertia 340 gcm² Explosion protection II 3 G Ex nA IIC T4 Gc (gas) II 3 D Ex tc IIIC T135°C Dc (dust) Reference signal Zero pulse, width 90° Materials Housing: aluminium die-cast Shaft: stainless steel Protection DIN EN 60529 IP 66 Sensing method Optical Shaft type ø12...20 mm (blind hollow shaft) ø17 mm (cone shaft 1:10) Operating torque typ. 6 Ncm manufacter SK
Switching delay time ≤40 ms Resistance IEC 60068-2-6 Vibration 10 g, 10-2000 Hz IEC 60068-2-27 Shock 200 g, 6 ms Size (flange) ø105 mm Phase shift 90° ±20° Voltage supply 9...30 VDC Reference signal Zero pulse, width 90° Approval CE Switching accuracy ±2 % (Digit) Emitted interference EN 61000-6-3 Admitted shaft load ≤450 N axial ≤600 N radial Rotor moment of inert
Speed (n) ≤6000 rpm Operating temperature -30...+85 °C HOG 10 + DSL.R output signals K1, K2, K0 + inverted Connection Terminal box Size (flange) ø105 mm Switching outputs 3 outputs, speed control Protection DIN EN 60529 IP 66 Sensing method Optical Reference signal Zero pulse, width 90° Switching delay time ≤40 ms Output frequency ≤120 kHz Explosion protection I
Switching hysteresis =30 % of switching speed Output stages HTL-P (power linedriver) TTL/RS422 Output frequency ≤120 kHz ≤300 kHz (on request) manufacter SKU HOG 10 + ESL 90 Operating temperature -20...+85 °C Switching delay time ≤40 ms Transmission length ≤350 m at 100 kHz (HTL-P) ≤550 m at 100 kHz (TTL) Range of switching speed (ns) 650...6000 rpm Switching outputs 1 output, speed
Shaft insulation 2.8 kV Voltage supply 12 VDC ±10 % Consumption w/o load ≤5 mA Shaft type ø16...20 mm (blind hollow shaft) ø17 mm (cone shaft 1:10) Operating temperature -20...+85 °C Rotor moment of inertia 680 gcm² Operating speed ≤5000 rpm Protection DIN EN 60529 IP 66 Size (flange) ø105 mm Weight approx. 2.3 kg 2.5 kg (with option M) Pulses per revolu
Operating torque typ. 6 Ncm Emitted interference EN 61000-6-3 Consumption w/o load ≤100 mA Range of switching speed (ns) 850...4500 rpm (Δn = 2 rpm/s) Output stages HTL-P (power linedriver) TTL/RS422 Phase shift 90° ±20° Speed (n) ≤1.25 · ns Switching accuracy ±4 % (Δn = 2 rpm/s); = +20 % (Δn = 1500 rpm/s) Approval CE Shaft type ø16...20 mm (blind h
Incremental encoders - combination HOG 10 + FSL TTL output driver for cable length up to 550 m Mechanical speed monitoring based on centrifugal force Hybrid bearing for extended service life Terminal boxes, turn by 180°
INCREMENTAL ENCODER ø12...20 mm (blind hollow shaft), ø17 mm (cone shaft 1:10). Optical sensing, blind hollow shaft. Catalogue number 700000682675. Incremental encoders Baumer Hubner HOG 10 DN 1024 I series are  designed  for equipment where very high resistance to shock and vibrations are required.  Also they have hybrid bearing for extended lifetime. The main characteristics of HOG 10 DN 1024
Weight approx. 2.9 kg 3.3 kg (with option M) Materials Housing: aluminium die-cast Shaft: stainless steel Approvals CE UL approval / E256710 Sensing method Optical Connection 2x terminal box 4x terminal box (with option M) Reference signal Zero pulse, width 90° Shaft type ø16...20 mm (blind hollow shaft) ø17 mm (cone shaft 1:10) Size (flange) ø105 mm Operating speed ≤6000
Materials Housing: aluminium die-cast Shaft: stainless steel Reference signal Zero pulse, width 90° HOG 100 output signals K1, K2, K0 + inverted Consumption w/o load ≤100 mA Resistance IEC 60068-2-6 Vibration 20 g, 10-2000 Hz IEC 60068-2-27 Shock 300 g, 6 ms Output frequency ≤250 kHz manufacter SKU HOG 100 Operating temperature -30...+85 °C Approvals CE UL approval / E256710 Sensing me
Shaft type ø12...20 mm (blind hollow shaft) ø17 mm (cone shaft 1:10) Admitted shaft load ≤450 N axial ≤600 N radial Reference signal Zero pulse, width 90° Shaft insulation 2.8 kV Sensing method Optical Materials Housing: aluminium die-cast Shaft: stainless steel Output frequency ≤120 kHz ≤300 kHz (on request) Scan ratio 40...60 % Rotor moment of inertia 340 gcm²
Switching hysteresis =30 % of switching speed Switching delay time ≤40 ms Reference signal Zero pulse, width 90° Output frequency ≤120 kHz ≤300 kHz (on request) Voltage supply 9...30 VDC; 5 VDC ±5 % Size (flange) ø105 mm Emitted interference EN 61000-6-3 Approval CE Operating temperature -20...+85 °C Transmission length ≤350 m at 100 kHz (HTL-P) ≤550 m at 100 kHz (TT
Approval CE Weight approx. 2.3 kg 2.5 kg (with option M) Resistance IEC 60068-2-6 Vibration 5 g, 10-2000 Hz IEC 60068-2-27 Shock 50 g, 6 ms HOG 11 + ESL 93 output signals K1, K2, K0 + inverted Error output (only EMS) Phase shift 90° ±20° Switching delay time ≤40 ms Reference signal Zero pulse, width 90° Switching hysteresis =30 % of switching speed Scan ratio 40...60 % Operating speed
Menu
Mail Us
enquiry@onstocktrading.com