Operating torque typ. 0.023 Nm Relative humidity 95 % Emitted interference DIN EN 61000-6-3 Programmable parameters Operating modes Total resolution Scaling Rotation speed monitoring Resistance DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz DIN EN 60068-2-27 Shock 500 g, 6 ms Diagnostic functions Position or parameter error Multiturn sensing Shaft type ø6 mm solid shaft (synchro flange) Approval
Approval UL approval / E217823 Code Binary Connection Connector D-SUB, 9-pin Emitted interference DIN EN 61000-6-3 Protection DIN EN 60529 IP 65 Resistance DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz DIN EN 60068-2-27 Shock 500 g, 6 ms Relative humidity 95 % Profile conformity Device Profile Encoder V 1.0 Code sequence CW default, programmable Sensing method Magnetic Absolute accuracy
Protection DIN EN 60529 IP 65 (without shaft seal) IP 67 (with shaft seal) Voltage supply 10...30 VDC Shaft type ø6 x 10 mm, solid shaft with flat (synchro flange) Emitted interference DIN EN 61000-6-3 Steps per turn ≤4096 / 12 bit Programmable parameters Steps per revolution Number of revolutions Preset Scaling Rotating direction Resistance DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz DIN EN 60068
Protection DIN EN 60529 IP 65 Consumption typ. 50 mA (24 VDC, w/o load) Interface 12 parallel outputs Approval UL approval / E217823 Shaft type ø6 mm solid shaft (synchro flange) Code sequence CW: ascending values with clockwise sense of rotation; looking at flange Size (flange) ø58 mm Steps per turn ≤4096 / 12 bit Operating torque typ. 0.023 Nm manufacter SKU BMSV 58S parall
Shaft type ø12 mm (blind hollow shaft) Size (flange) ø58 mm Materials Housing: aluminium Flange: aluminium Output stages Antivalent Push-pull short-circuit proof Approval UL approval / E217823 Operating temperature -20...+85 °C manufacter SKU BRIH - EcoMag Consumption typ. 30 mA (5 VDC, w/o load) 15 mA (24 VDC, w/o load) Protection DIN EN 60529 IP 42 IP 65 Pulses per revolution
Shaft type ø6 mm (blind hollow shaft) ø12 mm (blind hollow shaft) Size (flange) ø40 mm Relative humidity 95 % non-condensing Protection DIN EN 60529 IP 64 Interference immunity DIN EN 61000-6-2 Connection Connector M9, 5-pin Connector M9, 8-pin Cable 1 m BRIH 40 - EcoMag output signals A 90° B, N + inverted Materials Housing: polyamide black Flange: aluminium Operating temperat
Size (flange) ø30 mm Operating temperature -20...+85 °C -20...+65 °C Interference immunity DIN EN 61000-6-2 Approval UL approval / E217823 BRIV 30 - EcoMag output signals A 90° B, N + inverted Resistance DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz DIN EN 60068-2-27 Shock 100 g, 6 ms Materials Housing: polyamide black Flange: aluminium Voltage supply 5 VDC ±10 % 20...28 VDC Output freque
Operating speed ≤6000 rpm Weight approx. 100 g Reference signal Zero pulse, width 90° Sensing method Magnetic Consumption typ. 25 mA (5 VDC, w/o load) 30 mA (24 VDC, w/o load) Admitted shaft load ≤30 N axial ≤50 N radial Flange Synchro flange Size (flange) ø30 mm manufacter SKU BRIV 30R - EcoMag Approval UL approval / E217823 Operating temperature -40...+85 °C (only 5 V
Reference signal Zero pulse, width 90° Flange Synchro flange Resistance DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz DIN EN 60068-2-27 Shock 500 g, 6 ms Weight approx. 150 g Emitted interference DIN EN 61000-6-3 Relative humidity 95 % non-condensing Operating torque typ. 0.0175 Nm (IP 42) 0.047 Nm (IP 65) Admitted shaft load ≤40 N axial ≤50 N radial Output stages Antivalent Push-pull short
Pulses per revolution 250...2500 Phase shift 90° ±20° Interference immunity EN 61000-6-2 Output stages HTL TTL/RS422 Size (flange) ø160 mm Scan ratio 40...60 % manufacter SKU EEx HOG 161 Explosion protection II 2 G Ex d e IIC T6 Gb Ex d e IIC T6 Gb Resistance IEC 60068-2-6 Vibration 10 g, 50-2000 Hz IEC 60068-2-27 Shock 100 g, 6 ms Reference signal Zero pulse, width 90° Approv
Output stages TTL/RS422 HTL/push-pull manufacter SKU EIL580-B - blind hollow shaft - Option 6301 Weight approx. 300 g Resistance DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz DIN EN 60068-2-27 Shock 250 g, 6 ms Approval UL 508 / CSA 22.2 Motor shaft tolerance 0.2 mm axial 0.03 mm radial Interference immunity DIN EN 61000-6-2 Emitted interference DIN EN 61000-6-3 Sensing method Optical Pulses per
Resistance DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz DIN EN 60068-2-27 Shock 300 g, 6 ms Protection DIN EN 60529 IP 65 (without shaft seal) IP 67 (with shaft seal) Reference signal Zero pulse, width 90° ±10 % Output frequency ≤300 kHz (TTL) ≤160 kHz (HTL) Weight approx. 300 g Sensing method Optical Operating speed ≤6000 rpm (+20 °C, IP 67) ≤12000 rpm (+20 °C, IP 65) Short-circuit proof
Output frequency ≤300 kHz (TTL) ≤160 kHz (HTL) Reverse polarity protection Yes manufacter SKU EIL580P-SC - clamping flange Sensing method Optical Admitted shaft load ≤40 N axial ≤80 N radial Reference signal Zero pulse 90° or 180° Starting torque ≤0.015 Nm (+20 °C, IP 65) ≤0.02 Nm (+20 °C, IP 67) Scan ratio 45...55 % typical at 2048 ppr Weight approx. 300 g Size (flange)
Protection DIN EN 60529 IP 65 (without shaft seal) IP 67 (with shaft seal) Scan ratio 45...55 % typical at 2048 ppr Reference signal Zero pulse 90° or 180° Operating temperature -40...+100 °C Voltage supply 4.75...30 VDC Approval UL 508 / CSA 22.2 Admitted shaft load ≤40 N axial ≤80 N radial Emitted interference DIN EN 61000-6-3 Output frequency ≤300 kHz (TTL) ≤160 kHz (HTL) Int
manufacter SKU EIL580P-T - through hollow shaft Starting torque ≤0.02 Nm (+20 °C, IP 65) ≤0.025 Nm (+20 °C, IP 67) Sensing method Optical Materials Housing: aluminium die-cast Flange: aluminium Shaft type ø8...15 mm (through hollow shaft) Consumption w/o load ≤70 mA Programmable parameters Output level TTL/HTL Pulse number 1...65536 Zero pulse width 90°/180° Zero pulse position Signal seque
