Specification: Part Number 1057076 Signal voltage HIGH: Vs - 2 V Design: Standard Maximum level change: 500 mm/s Process connection: G ¾ A Inductive load: < 1 H RoHS certificate: + Protection class: III Process temperature: -20 °C ... +100 °C Output signal: 1 PNP transistor output (Q1) and 1 PNP / NPN transistor output (Q2) switchable, 4 mA ... 20 mA, 0 V ... 10 V automatic switching depending on the l
Specification: Part Number 1062248 Process temperature: -20 °C ... +100 °C Inactive area at probe end: 10 mm Signal voltage LOW: ≤ 2 V Design: Standard Ambient temperature operation: -20 °C ... +60 °C Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 350 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 15 V Probe length: 500 mm CULus certificate: + Max.probe load: 6 Nm MTT
Specification: Part Number 1057095 Hysteresis: Min. 2 mm, free adjustable EMC: EN 61326-1:2006, 2004/108/EG Resolution: < 2 mm Lower signal level: 3.8 mA ... 4 mA CULus certificate: + GOST approval: + Response time: < 400 ms Ambient storage temperature: -40 °C ... +80 °C Signal voltage LOW: ≤ 2 V Upper signal level: 20 mA ... 20.5 mA Housing material: Plastic PBT Conductivity: No limitat
Specification: Part Number 1071118 Protection class: III Interference resistance: EN 61000-6-2:2005 Inactive area at process connector: 25 mm Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK 3-A: - Repeatability: ≤ 2 mm EHEDG approval: + Measurement: Switch, Continuous Power consumption: ≤ 75 mA at 24 V DC without output load Lower signal level: 3.8 mA ... 4 mA GOST approval: + Housing materia
Specification: Part Number 1052070 Repeatability: ≤ 2 mm Protection class: III Hysteresis: Min. 2 mm, free adjustable Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 400 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 13,5 V Upper signal level: 20 mA ... 20.5 mA Measurement: Switch, Continuous Inductive load: < 1 H Conductivity: No limitation Medium: Fluids Accuracy of se
Specification: Part Number 1057077 IO-Link: + Supply voltage: 12 V DC ... 30 V DC Connection type: Round connector M12 x 1, 5-pin GOST approval: + Process pressure: -1 bar ... 10 bar Measurement: Switch, Continuous Process connection: G ¾ A Initialization time: ≤ 5 s Ambient temperature operation: -20 °C ... +60 °C Inactive area at probe end: 10 mm Probe type: Mono rod probe Probe length
Specification: Part Number 1057096 Response time: < 400 ms Supply voltage: 12 V DC ... 30 V DC Max.probe load: 6 Nm IO-Link: + Measurement: Switch, Continuous Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 350 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 15 V Resolution: < 2 mm Temperature drift: < 0.1 mm/K Process connection: ¾" NPT Inductive load: < 1 H Housing
Specification: Part Number 1052071 Response time: < 400 ms Temperature drift: < 0.1 mm/K Repeatability: ≤ 2 mm Housing material: 303 Measurement: Switch, Continuous Process connection: G ¾ A Medium: Fluids Inductive load: < 1 H Protection class: III Probe length: 600 mm Signal voltage LOW: ≤ 2 V Connection type: Round connector M12 x 1, 5-pin Lower signal level: 3.8 mA ... 4 mA
Specification: Part Number 1057078 GOST approval: + Resolution: < 2 mm Repeatability: ≤ 2 mm Dielectricity constant: ≥ 1.8 with coaxial tube, ≥ 5 for mono rod probe / rope probe Power consumption: ≤ 100 mA at 24 V DC without output load MTTF: 194.3 a (EN ISO 13849-1) EMC: EN 61326-1:2006, 2004/108/EG Probe length: 700 mm Response time: < 400 ms IO-Link: + Connection type: Round connec
Specification: Part Number 1062250 Process connection: G ¾ A Inactive area at process connector: 25 mm Housing material: Plastic PBT Response time: < 400 ms Hysteresis: Min. 2 mm, free adjustable Process pressure: -1 bar ... 10 bar Probe type: Mono rod probe Process temperature: -20 °C ... +100 °C Power consumption: ≤ 100 mA at 24 V DC without output load Inductive load: < 1 H RoHS certific
Specification: Part Number 1057097 Process temperature: -20 °C ... +100 °C Housing material: Plastic PBT Response time: < 400 ms MTTF: 194.3 a (EN ISO 13849-1) EMC: EN 61326-1:2006, 2004/108/EG Signal voltage HIGH: Vs - 2 V CULus certificate: + GOST approval: + Repeatability: ≤ 2 mm Probe type: Mono rod probe Temperature drift: < 0.1 mm/K Inactive area at probe end: 10 mm Process pre
Specification: Part Number 1052072 Measurement: Switch, Continuous Temperature drift: < 0.1 mm/K Ambient storage temperature: -40 °C ... +80 °C Wetted parts: 316L (Ra ≤ 0,8 µm), PEEK Initialization time: ≤ 2 s Inductive load: < 1 H UL approval: + Process pressure: -1 bar ... 16 bar Ambient temperature operation: -20 °C ... +60 °C RoHS certificate: + Single- and continuous shock: EN 60
Specification: Part Number 1057079 Design: Standard Process connection: G ¾ A Output signal: 1 PNP transistor output (Q1) and 1 PNP / NPN transistor output (Q2) switchable, 4 mA ... 20 mA, 0 V ... 10 V automatic switching depending on the load. Ambient temperature operation: -20 °C ... +60 °C Lower signal level: 3.8 mA ... 4 mA Dielectricity constant: ≥ 1.8 with coaxial tube, ≥ 5 for mono rod probe / rope pro
Specification: Part Number 1062251 Resolution: < 2 mm Supply voltage: 12 V DC ... 30 V DC Response time: < 400 ms Probe length: 800 mm Housing material: Plastic PBT Lower signal level: 3.8 mA ... 4 mA Power consumption: ≤ 100 mA at 24 V DC without output load Maximum level change: 500 mm/s Dielectricity constant: ≥ 1.8 with coaxial tube, ≥ 5 for mono rod probe / rope probe Measurement: Swit
Specification: Part Number 1052073 Inductive load: < 1 H EMC: EN 61326-1:2006, 2004/108/EG IO-Link: + Signal voltage HIGH: Vs - 2 V Hysteresis: Min. 2 mm, free adjustable Interference resistance: EN 61000-6-2:2005 3-A: - Signal voltage LOW: ≤ 2 V Connection type: Round connector M12 x 1, 5-pin UL approval: + Output current: < 100 mA MTTF: 194.3 a (EN ISO 13849-1) Probe length: 800 mm
Specification: Part Number 1057080 Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 350 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 15 V Probe type: Mono rod probe IO-Link: + Repeatability: ≤ 2 mm Enclosure rating: IP 67: EN 60529 Inactive area at probe end: 10 mm Supply voltage: 12 V DC ... 30 V DC Process connection: G ¾ A Process pressure: -1 bar ... 10 bar Maximum
Specification: Part Number 1052074 Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 400 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 13,5 V EMC: EN 61326-1:2006, 2004/108/EG Max.probe load: 6 Nm Process connection: G ¾ A Enclosure rating: IP 67: EN 60529, IP 69K: EN 40050 Accuracy of sensor element: ± 5 mm Interference resistance: EN 61000-6-2:2005 Resolution: < 2 mm Connect
Specification: Part Number 1057081 Measurement: Switch, Continuous Repeatability: ≤ 2 mm Supply voltage: 12 V DC ... 30 V DC Capacitive load: 100 nF Inductive load: < 1 H GOST approval: + Signal voltage LOW: ≤ 2 V Hysteresis: Min. 2 mm, free adjustable Resolution: < 2 mm Response time: < 400 ms Ambient storage temperature: -40 °C ... +80 °C Connection type: Round connector M12 x 1,
Specification: Part Number 1071092 Probe type: Mono rod probe Measurement: Switch, Continuous Process pressure: -1 bar ... 10 bar MTTF: 194.3 a (EN ISO 13849-1) Supply voltage: 12 V DC ... 30 V DC Process temperature: -20 °C ... +100 °C Upper signal level: 20 mA ... 20.5 mA Resolution: < 2 mm Dielectricity constant: ≥ 1.8 with coaxial tube, ≥ 5 for mono rod probe / rope probe Response time:
Specification: Part Number 1071097 Resolution: < 2 mm Conductivity: No limitation Protection class: III Lower signal level: 3.8 mA ... 4 mA Ambient temperature operation: -20 °C ... +60 °C Repeatability: ≤ 2 mm EMC: EN 61326-1:2006, 2004/108/EG Medium: Fluids Hysteresis: Min. 2 mm, free adjustable Housing material: Plastic PBT Temperature drift: < 0.1 mm/K Process temperature: -20 °C ..
Specification: Part Number 1062253 Inactive area at process connector: 25 mm Hysteresis: Min. 2 mm, free adjustable MTTF: 194.3 a (EN ISO 13849-1) Conductivity: No limitation Initialization time: ≤ 5 s CULus certificate: + Measurement: Switch, Continuous Probe type: Mono rod probe Wetted parts: 1.4404, PTFE RoHS certificate: + GOST approval: + Enclosure rating: IP 67: EN 60529 Max.probe
Specification: Part Number 1052075 Signal voltage HIGH: Vs - 2 V UL approval: + Temperature drift: < 0.1 mm/K Inductive load: < 1 H Supply voltage: 12 V DC ... 30 V DC Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 400 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 13,5 V GOST approval: + Housing material: 303 Capacitive load: 100 nF IO-Link: + Response time: < 400
Specification: Part Number 1057082 MTTF: 194.3 a (EN ISO 13849-1) Process connection: G ¾ A Inactive area at probe end: 10 mm Signal voltage LOW: ≤ 2 V Repeatability: ≤ 2 mm Initialization time: ≤ 5 s Design: Standard Temperature drift: < 0.1 mm/K Inactive area at process connector: 25 mm Hysteresis: Min. 2 mm, free adjustable Probe type: Mono rod probe Measurement: Switch, Continu
Specification: Part Number 1062254 CULus certificate: + Ambient temperature operation: -20 °C ... +60 °C Output signal: 1 PNP transistor output (Q1) und 3 PNP / NPN transistor output (Q2...Q4) switchable, 4 mA ... 20 mA, 0 V ... 10 V automatic switching depending on the load. Ambient storage temperature: -40 °C ... +80 °C Capacitive load: 100 nF Measurement: Switch, Continuous Lower signal level: 3.8 mA ... 4
Specification: Part Number 1052076 MTTF: 194.3 a (EN ISO 13849-1) Inductive load: < 1 H Response time: < 400 ms Process pressure: -1 bar ... 16 bar Accuracy of sensor element: ± 5 mm Dielectricity constant: ≥ 1.8 with coaxial tube, ≥ 5 for mono probe Inactive area at process connector: 25 mm Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 400 Ohm at Uv > 12 V, 4 mA ... 20 mA
Specification: Part Number 1057083 Accuracy of sensor element: ± 5 mm Power consumption: ≤ 100 mA at 24 V DC without output load Probe type: Mono rod probe Hysteresis: Min. 2 mm, free adjustable Inactive area at probe end: 10 mm Wetted parts: 1.4404, PTFE Enclosure rating: IP 67: EN 60529 Connection type: Round connector M12 x 1, 5-pin Dielectricity constant: ≥ 1.8 with coaxial tube, ≥ 5 for mo
Specification: Part Number 1052077 Protection class: III Process connection: G ¾ A Response time: < 400 ms Lower signal level: 3.8 mA ... 4 mA Power consumption: ≤ 75 mA at 24 V DC without output load Hysteresis: Min. 2 mm, free adjustable Supply voltage: 12 V DC ... 30 V DC MTTF: 194.3 a (EN ISO 13849-1) Ambient storage temperature: -40 °C ... +80 °C IO-Link: + Process temperature: -20 °
Specification: Part Number 1057084 Ambient temperature operation: -20 °C ... +60 °C Upper signal level: 20 mA ... 20.5 mA Output signal: 1 PNP transistor output (Q1) and 1 PNP / NPN transistor output (Q2) switchable, 4 mA ... 20 mA, 0 V ... 10 V automatic switching depending on the load. Housing material: Plastic PBT Hysteresis: Min. 2 mm, free adjustable EMC: EN 61326-1:2006, 2004/108/EG Resolution: < 2 mm
Specification: Part Number 1052078 3-A: - Enclosure rating: IP 67: EN 60529, IP 69K: EN 40050 Dielectricity constant: ≥ 1.8 with coaxial tube, ≥ 5 for mono probe Process temperature: -20 °C ... +150 °C Max.probe load: 6 Nm Accuracy of sensor element: ± 5 mm Hysteresis: Min. 2 mm, free adjustable Lower signal level: 3.8 mA ... 4 mA Connection type: Round connector M12 x 1, 5-pin Process connecti
Specification: Part Number 1057085 Response time: < 400 ms Wetted parts: 1.4404, PTFE Inductive load: < 1 H Resolution: < 2 mm Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 350 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 15 V Power consumption: ≤ 100 mA at 24 V DC without output load Medium: Fluids Maximum level change: 500 mm/s Measurement: Switch, Continuous Enclo
