LFP0600-A4NMB

Specification: Part Number 1057077 IO-Link: + Supply voltage: 12 V DC ... 30 V DC Connection type: Round connector M12 x 1, 5-pin GOST approval: + Process pressure: -1 bar ... 10 bar Measurement: Switch, Continuous Process connection: G ¾ A Initialization time: &le; 5 s Ambient temperature operation: -20 °C ... +60 °C Inactive area at probe end: 10 mm Probe type: Mono rod probe Probe length: 600 mm MTTF: 194.3 a (EN ISO 13849-1) Signal voltage HIGH: Vs - 2 V Power consumption: &le; 100 mA at 24 V DC without output load Inductive load: < 1 H Housing material: Plastic PBT Design: Standard Maximum level change: 500 mm/s EMC: EN 61326-1:2006, 2004/108/EG Output current: < 100 mA Resolution: < 2 mm Signal voltage LOW: &le; 2 V Conductivity: No limitation Hysteresis: Min. 2 mm, free adjustable CULus certificate: + Output signal: 1 PNP transistor output (Q1) and 1 PNP / NPN transistor output (Q2) switchable, 4 mA ... 20 mA, 0 V ... 10 V automatic switching depending on the load. Protection class: III Enclosure rating: IP 67: EN 60529 Inactive area at process connector: 25 mm Capacitive load: 100 nF Wetted parts: 1.4404, PTFE Accuracy of sensor element: ± 5 mm Medium: Fluids Ambient storage temperature: -40 °C ... +80 °C Upper signal level: 20 mA ... 20.5 mA Repeatability: &le; 2 mm RoHS certificate: + Temperature drift: < 0.1 mm/K Dielectricity constant: &ge; 1.8 with coaxial tube, &ge; 5 for mono rod probe / rope probe Response time: < 400 ms Lower signal level: 3.8 mA ... 4 mA Process temperature: -20 °C ... +100 °C Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 350 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 15 V Max.probe load: 6 Nm