LFP1000-A5NMC

Specification: Part Number 1062253 Inactive area at process connector: 25 mm Hysteresis: Min. 2 mm, free adjustable MTTF: 194.3 a (EN ISO 13849-1) Conductivity: No limitation Initialization time: &le; 5 s CULus certificate: + Measurement: Switch, Continuous Probe type: Mono rod probe Wetted parts: 1.4404, PTFE RoHS certificate: + GOST approval: + Enclosure rating: IP 67: EN 60529 Max.probe load: 6 Nm Temperature drift: < 0.1 mm/K Lower signal level: 3.8 mA ... 4 mA Process pressure: -1 bar ... 10 bar Process temperature: -20 °C ... +100 °C Inactive area at probe end: 10 mm Signal voltage HIGH: Vs - 2 V Ambient temperature operation: -20 °C ... +60 °C Protection class: III Ambient storage temperature: -40 °C ... +80 °C Inductive load: < 1 H Capacitive load: 100 nF Dielectricity constant: &ge; 1.8 with coaxial tube, &ge; 5 for mono rod probe / rope probe Resolution: < 2 mm Supply voltage: 12 V DC ... 30 V DC Accuracy of sensor element: ± 5 mm Maximum level change: 500 mm/s EMC: EN 61326-1:2006, 2004/108/EG IO-Link: + Output load: 0 V ... 10 V > 750 Ohm at Uv >= 14 V, 4 mA ... 20 mA < 350 Ohm at Uv > 12 V, 4 mA ... 20 mA < 500 Ohm at Uv > 15 V Power consumption: &le; 100 mA at 24 V DC without output load Repeatability: &le; 2 mm Response time: < 400 ms Medium: Fluids Signal voltage LOW: &le; 2 V Connection type: Round connector M12 x 1, 8-pin Design: Standard Housing material: Plastic PBT Process connection: G ¾ A Output current: < 100 mA Output signal: 1 PNP transistor output (Q1) und 3 PNP / NPN transistor output (Q2...Q4) switchable, 4 mA ... 20 mA, 0 V ... 10 V automatic switching depending on the load. Upper signal level: 20 mA ... 20.5 mA Probe length: 1,000 mm