Specification: Part Number 1030030 Max. number of revolutions: 4,096 Mechanical interface: Through hollow shaft Resolution power: 4,096 x 4,096 SET (electronic adjustment): H-active (L &;8801; 0 - 4,7 V, H &;8801; 10 - Us V) Initialization time: 1,050 ms Housing material: Die-cast aluminum Parameterising data: Number of revolutions, Code type, Electronic adjustment, Number of steps per revolution Shaft diamete
Specification: Part Number 1030031 Bearing lifetime: 3.6 x 10^9 revolutions Operating voltage range: 10 V ... 32 V CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Operating torque: 0.4 Ncm Permissible relative humidity: 98 % EMC: (according to EN 61000-6-2 and EN 61000-6-3) Clock frequency: 1 MHz Code type: Binary, Gray Enclosure rating: IP 65 (according to IE
Specification: Part Number 1030032 CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1,5 V, H &;8801; 2,0 - Us V) Start up torque: 0.5 Ncm Resolution: 12 bit x 12 bit Operating torque: 0.4 Ncm Parameterising data: Number of revolutions, Code type, Electronic adjustment, Number of steps per revolution Mechanical interface: Through hollow shaft Connection type: Cable, 12-pin, radial, 3 m Shaft mat
Specification: Part Number 1030033 Connection type: Cable, 12-pin, radial, 5 m Measuring step: 0.043 ° Bearing lifetime: 3.6 x 10^9 revolutions Max. number of steps per revolution: 4,096 Repeat accuracy: 0.1 ° Enclosure rating: IP 65 (according to IEC 60529), with shaft seal Max. number of revolutions: 4,096 Start up torque: 0.5 Ncm Code sequence: CW/CCW Flange material: Aluminum Shaft diameter:
Specification: Part Number 1030034 Permissible relative humidity: 98 % Operating voltage range: 10 V ... 32 V Working temperature range: -20 °C ... +70 °C Start up torque: 0.5 Ncm Operating torque: 0.4 Ncm Clock frequency: 1 MHz Enclosure rating: IP 65 (according to IEC 60529), with shaft seal Electrical interface: SSI Repeat accuracy: 0.1 ° Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (accor
Specification: Part Number 1030035 Operating voltage range: 10 V ... 32 V Resolution power: 4,096 x 4,096 Max. number of revolutions: 4,096 EMC: (according to EN 61000-6-2 and EN 61000-6-3) Storage temperature range: -40 °C ... +100 °C, without package Initialization time: 1,050 ms Operating torque: 0.4 Ncm Max. number of steps per revolution: 4,096 Clock frequency: 1 MHz SET (electronic adjustment)
Specification: Part Number 1030038 Resolution: 12 bit x 12 bit Power consumption max. without load: 0.8 W Operating torque: 0.4 Ncm Connection type: Connector M23, 12-pin, radial Parameterising data: Number of revolutions, Code type, Electronic adjustment, Number of steps per revolution Initialization time: 1,050 ms Mass: 0.8 kg Measuring step: 0.043 ° Start up torque: 0.5 Ncm Working temperature rang
Specification: Part Number 1030039 Error limits: ± 0.25 ° Interface signals: Clock +, Clock -, Data +, Data-, Programming interface: RS-422 Max. number of revolutions: 4,096 Permissible relative humidity: 98 % Enclosure rating: IP 65 (according to IEC 60529), with shaft seal Repeat accuracy: 0.1 ° Measuring step: 0.043 ° Operating voltage range: 10 V ... 32 V Max. number of steps per revolution: 4,09
Specification: Part Number 1030040 Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) Clock frequency: 1 MHz Measuring step: 0.043 ° Repeat accuracy: 0.1 ° Max. number of revolutions: 4,096 Max. angular acceleration: 600,000 rad/s² Power consumption max. without load: 0.8 W Permissible relative humidity: 98 % Storage temperature range: -40 °C ... +100 °C, without package
Specification: Part Number 1030041 Mechanical interface: Through hollow shaft Resolution: 12 bit x 12 bit Max. angular acceleration: 600,000 rad/s² SET (electronic adjustment): H-active (L &;8801; 0 - 4,7 V, H &;8801; 10 - Us V) Max. number of steps per revolution: 4,096 Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz (according to EN 60068-2-6) CW/CCW (counting sequence when turning): L-active (L &;8801; 0 - 1
Specification: Part Number 1032896 Repeat accuracy: 0.1 ° SET (electronic adjustment): Via PRESET push button or protocol MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) Flange material: Aluminum Storage temperature range: -40 °C ... 125 °C, without package Max. number of revolutions: 8,192 EMC: (according to EN 61000-6-2 and EN 61000-6-3) Operating voltage range: 10 V ... 32 V Working tem
Specification: Part Number 1032660 Initialization time: 1,250 ms Bearing lifetime: 3.6 x 10^9 revolutions Enclosure rating: IP 65 (according to IEC 60529), with shaft seal Bus termination: DIP switch Max. number of revolutions: 4,096 Housing material: Die-cast aluminum Start up torque: 0.5 Ncm Storage temperature range: -40 °C ... 125 °C, without package Moment of inertia of the rotor: 153 gcm² Elec
Specification: Part Number 1032654 Operating voltage range: 10 V ... 32 V Housing material: Die-cast aluminum Status information: LED green (operation), LED red ( bus activity) Enclosure rating: IP 65 (according to IEC 60529), with shaft seal Mass: 0.6 kg Shaft diameter: 12 mm Data protocol: Profile for encoders (07hex) - Class 2 Power consumption max.: 2 W Measuring step: 0.043 ° SET (electronic adjus
Specification: Part Number 1030042 Resolution: 13 bit x 13 bit Address setting: 0 ... 127, DIP-switches or protocol Error limits: ± 0.25 ° Moment of inertia of the rotor: 153 gcm² Storage temperature range: -40 °C ... 125 °C, without package SET (electronic adjustment): Via PRESET push button or protocol Mass: 0.6 kg MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) Status information: LE
Specification: Part Number 1032663 Shaft diameter: 12 mm Mechanical interface: Through hollow shaft Working temperature range: -20 °C ... 80 °C Resolution: 12 bit x 12 bit Bus termination: DIP switch Max. number of steps per revolution: 4,096 Permissible relative humidity: 98 % Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz Address setting: 0 ... 127, DIP-switches or protocol SET (electronic adjust
Specification: Part Number 1032657 Bus interface: RS-485 Bearing lifetime: 3.6 x 10^9 revolutions Operating voltage range: 10 V ... 32 V Permissible relative humidity: 98 % SET (electronic adjustment): Via PRESET push button or protocol Power consumption max.: 2 W Max. angular acceleration: 600,000 rad/s² Shaft diameter: 12 mm Enclosure rating: IP 65 (according to IEC 60529), with shaft seal Repeat
Specification: Part Number 1030045 Max. number of revolutions: 8,192 Max. angular acceleration: 600,000 rad/s² Resistance to shocks: 6 g (according to EN 60068-2-27) Mechanical interface: Through hollow shaft Resolution: 13 bit x 13 bit Status information: LED green (operation), LED red ( bus activity) Working temperature range: -20 °C ... 80 °C EMC: (according to EN 61000-6-2 and EN 61000-6-3) Resistanc
Specification: Part Number 1032661 Bus interface: RS-485 Housing material: Die-cast aluminum Max. number of revolutions: 4,096 Initialization time: 1,250 ms Error limits: ± 0.25 ° Moment of inertia of the rotor: 153 gcm² MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) Address setting: 0 ... 127, DIP-switches or protocol Working temperature range: -20 °C ... 80 °C EMC: (according
Specification: Part Number 1032655 Max. number of revolutions: 2,048 Mechanical interface: Through hollow shaft Data protocol: Profile for encoders (07hex) - Class 2 Bus interface: RS-485 Moment of inertia of the rotor: 153 gcm² Working temperature range: -20 °C ... 80 °C Measuring step: 0.043 ° Permissible relative humidity: 98 % Resistance to shocks: 6 g (according to EN 60068-2-27) Operating t
Specification: Part Number 1032664 Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz Address setting: 0 ... 127, DIP-switches or protocol Max. number of revolutions: 4,096 Resistance to shocks: 6 g (according to EN 60068-2-27) Mechanical interface: Through hollow shaft Data protocol: Profile for encoders (07hex) - Class 2 Bus termination: DIP switch Bearing lifetime: 3.6 x 10^9 revolutions Housing material:
Specification: Part Number 1032658 Error limits: ± 0.25 ° Moment of inertia of the rotor: 153 gcm² EMC: (according to EN 61000-6-2 and EN 61000-6-3) Start up torque: 0.5 Ncm Enclosure rating: IP 65 (according to IEC 60529), with shaft seal Operating voltage range: 10 V ... 32 V Max. number of steps per revolution: 8,192 Housing material: Die-cast aluminum Status information: LED green (operation), LED r
Specification: Part Number 1030046 Bearing lifetime: 3.6 x 10^9 revolutions MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) Initialization time: 1,250 ms Measuring step: 0.043 ° Bus: PROFIBUS DP Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection Repeat accuracy: 0.1 ° EMC: (according to EN 61000-6-2 and EN 61000-6-3) Electrical interface: Bus adaptor with 3 cab
Specification: Part Number 1032898 Moment of inertia of the rotor: 153 gcm² Operating torque: 0.4 Ncm Bus interface: RS-485 Enclosure rating: IP 65 (according to IEC 60529), with shaft seal Measuring step: 0.043 ° Bearing lifetime: 3.6 x 10^9 revolutions Resistance to vibration: 20 g, 10 Hz ... 2,000 Hz Mass: 0.6 kg Error limits: ± 0.25 ° Max. angular acceleration: 600,000 rad/s² Max. number
Specification: Part Number 1032662 Shaft material: Stainless steel Operating voltage range: 10 V ... 32 V Address setting: 0 ... 127, DIP-switches or protocol Operating torque: 0.4 Ncm Repeat accuracy: 0.1 ° Resistance to shocks: 6 g (according to EN 60068-2-27) Shaft diameter: 16 mm SET (electronic adjustment): Via PRESET push button or protocol Power consumption max.: 2 W Housing material: Die-cast
Specification: Part Number 1032656 Initialization time: 1,250 ms Repeat accuracy: 0.1 ° Storage temperature range: -40 °C ... 125 °C, without package Enclosure rating: IP 65 (according to IEC 60529), with shaft seal Data protocol: Profile for encoders (07hex) - Class 2 Housing material: Die-cast aluminum Bearing lifetime: 3.6 x 10^9 revolutions EMC: (according to EN 61000-6-2 and EN 61000-6-3) Working t
Specification: Part Number 1030044 Max. angular acceleration: 600,000 rad/s² Bus termination: DIP switch EMC: (according to EN 61000-6-2 and EN 61000-6-3) Max. number of steps per revolution: 8,192 Repeat accuracy: 0.1 ° Resolution power: 8,192 x 8,192 Operating voltage range: 10 V ... 32 V Resistance to shocks: 6 g (according to EN 60068-2-27) Storage temperature range: -40 °C ... 125 °C, without pack
Specification: Part Number 1032901 Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection SET (electronic adjustment): Via PRESET push button or protocol Flange material: Aluminum Mechanical interface: Through hollow shaft MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) Electrical interface: Bus adaptor with 3 cable screw fixings Max. angular acceleration: 600,000 rad/s²
Specification: Part Number 1032665 Shaft material: Stainless steel Resolution: 12 bit x 12 bit Storage temperature range: -40 °C ... 125 °C, without package Flange material: Aluminum Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection Max. number of steps per revolution: 4,096 Operating torque: 0.4 Ncm Bus interface: RS-485 EMC: (according to EN 61000-6-2 and EN 61000-6-3)
Specification: Part Number 1032659 Electrical interface: Bus adaptor with 3 cable screw fixings Working temperature range: -20 °C ... 80 °C EMC: (according to EN 61000-6-2 and EN 61000-6-3) Start up torque: 0.5 Ncm Error limits: ± 0.25 ° Enclosure rating: IP 65 (according to IEC 60529), with shaft seal Address setting: 0 ... 127, DIP-switches or protocol Moment of inertia of the rotor: 153 gcm² Max. nu
Specification: Part Number 1030047 Data protocol: Profile for encoders (07hex) - Class 2 MTTFd: mean time to dangerous failure: 150 a (EN ISO 13849-1) Max. number of revolutions: 8,192 Bus interface: RS-485 Measuring step: 0.043 ° Data transmission rate (baud rate): 9.6 kBaud / 12 MBaud / automatic detection Repeat accuracy: 0.1 ° Moment of inertia of the rotor: 153 gcm² Housing material: Die-cast a
