C2MT-02414BBC03DE0

Specification: Part Number 1207795 Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Display elements: LEDs Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Resolution: 14 mm Typical range: 0 m ... 8 m Housing material: Aluminum alloy ALMGSI 0.5 Housing cross-section (incl. system connection): 15 mm x 32 mm Ripple: ≤ 10 % Storage temperature: -25 °C ... +70 °C External device monitoring (EDM): + Weight: 95 g Shock resistance: 10 g, 16 ms (EN 60068-2-27) TM (mission time): 20 a (EN ISO 13849) Connection type: Male connector M12, 5-pin PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Cable length: 350 mm Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Restart interlock (delivery status): Deactivated Enclosure rating: IP 65 (EN 60529) Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Switching current: 300 mA Type: Type 2 (IEC 61496) Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Beam coding: + Protective field height: 240 mm Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) External device monitoring (delivery status): Deactivated Power consumption: ≤ 3 A Protection class: III (EN 61140) Configuration method: Hard wired Automatic beam coding: + Switching voltage LOW: 2 V DC Cascaded: - Test rate (internal test): 58 /s Maximum demand rate: 34 /min (EN ISO 13849) Safe SICK device communication via EFI/SDL: - Response time: ≤ 14 ms Scanning range: 0 m ... 6 m Safe state in the event of a fault: At least one OSSD is in the OFF state. Synchronization: Optical, without separate synchronization Air humidity: 15 % ... 95 %, non-condensing Conductor cross-section: 0.34 mm² Ambient operating temperature: -20 °C ... +55 °C Permitted cable length: ≤ 20 m Restart interlock: + Category: Category 2 (EN ISO 13849)