C2MT-01834BBC03BE0

Specification: Part Number 1207848 Safe SICK device communication via EFI/SDL: - PFHd: Standalone system: 2.4  1E-08 (EN ISO 13849) Connection type: Male connector M12, 5-pin Typical range: 0 m ... 8 m Housing cross-section (incl. system connection): 15 mm x 32 mm Permitted cable length: ≤ 20 m Protective field height: 180 mm Synchronization: Optical, without separate synchronization Air humidity: 15 % ... 95 %, non-condensing Ambient operating temperature: -20 °C ... +55 °C Response time: ≤ 13 ms Restart interlock: + Supply voltage: 24 V DC (19.2 V DC ... 28.8 V DC) Protection class: III (EN 61140) Restart interlock (delivery status): Deactivated Maximum demand rate: 34 /min (EN ISO 13849) Housing material: Aluminum alloy ALMGSI 0.5 Safety integrity level: SIL1 (IEC 61508) SILCL1 (EN 62061) Switching current: 300 mA Performance level: PL c (EN ISO 13849), Pay attention to optical characteristics! Cable length: 160 mm Ripple: ≤ 10 % Weight: 75 g Configuration method: Hard wired External device monitoring (EDM): + Cascaded: - Integration via Flexi Soft safety controller: CANopenDeviceNetEtherCATEtherNet/IPModbus TCPPROFIBUS DPPROFINET Type: Type 2 (IEC 61496) Display elements: LEDs External device monitoring (delivery status): Deactivated Switching voltage LOW: 2 V DC Switching voltage HIGH: 24 V DC (VS - 2.25 V DC ... VS) Power consumption: ≤ 3 A Safe state in the event of a fault: At least one OSSD is in the OFF state. Type of output: PNP semiconductors, short-circuit protected, cross-circuit monitored Enclosure rating: IP 65 (EN 60529) TM (mission time): 20 a (EN ISO 13849) Vibration resistance: 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Resolution: 34 mm Shock resistance: 10 g, 16 ms (EN 60068-2-27) Storage temperature: -25 °C ... +70 °C Beam coding: + Conductor cross-section: 0.34 mm² Automatic beam coding: + Category: Category 2 (EN ISO 13849) Test rate (internal test): 58 /s Scanning range: 0 m ... 6 m